Error Code P2835: What It Means & What To Do?

 <<See All OBD Codes

The trouble code P2835 can be defined as Shift Fork "A" Position Circuit Intermittent. The shift fork "A" position circuit is being monitored by the transmission control module. This trouble code would be set by the TCM when the shift fork "A" position circuit would not be as per the specifications set by the manufacturer.

The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile. Two electric motors are utilized to shift the gears in the transmission, for gears 1-3-5 and one for gears R-2-4-6. The gear shifting is built by two shift drums which are connected to shift motor pinion via two ideal gears. The topmost shift force is 1500N (337 lb). The motors are non-segregated in the transmission control module (TCM) and work separately of each other.

What causes this problem with the Shift Fork "A" Position Circuit Intermittent?

• Unfashionable transmission control module (TCM) program
• Broken transmission control module (TCM)
• Defective transmission assembly

1. Engine Control Module - It is not always the components, but the ECM that can also be faulty. It can cause misinterpretation of correct data thus leading to wrong operational decisions which will affect the transmission and overall engine performance. Thus, replace faulty module and reprogram it now!
2. Transmission Fluid Pump - Faulty transmission fluid pump can cause harsh shifts and audible transmission noise. This leads to decreased performance and chances of increased physical damage to the transmission components. Thus, replace it immediately.
3. Powertrain Control Module - Powertrain Control Module can also be faulty in rare cases and thus needs through checks for system and software errors. Thus, check and replace it, if required.
4. Car Battery - Faulty car battery can have the problem of overheating and fast discharging. Thus, it can affect the motor performance as well as damaged major components. Replace it immediately.
5. Electronic Control Unit - The ECU manages the cooling system to control the battery operating temperatures and thus must be replaced if found faulty. Thus, buy new ECU modules and components from us!
6. Diagnostic Tool - Make use of quality diagnostic tools to resolve any OBD error code. Buy quality diagnostic tools from us!

Willing to know some common symptoms of OBD Trouble Code P2835? Your wish is our demand. Have a look at them below:

Common Symptoms

• Visibility in the check engine light
• Transmission might not shift properly
• Increase in the fuel consumption

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2835:

• Recondition the non-functioning transmission assembly
• It is necessary to perform proper service of the unsound transmission control module
• Adjust the flawed PCM/ECM

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade transmission control module, transmission gears, transmission assembly, auto transmission, pcm, ecm, tcm and a lot more for our precious customers.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

If the smoke is white, then it would mean that the fuel that is being injected into the combustion chamber is not being burned properly. The common causes behind the production of white smoke range from something as simple as low engine compression or water in the fuel to the fuel pump timing being thrown off because something might be starving the fuel from getting to the pump in the manner needed for the pump to time and work rightly. The main thing to inspect in the P2835 error code is the operation of the VCT solenoid. Search for a sticking or stuck VCt solenoid valve caused due to contamination. You can always refer to the vehicle specific repair manual to perform the component tests for the VCT unit.

Common Mistakes When Diagnosing The P2835 Code

• Some issues related to the internal transmission
• Failure in the transmission control module
• There might be a need to calibrate the transmission control module (TCM)
• Transmission control module (TCM) software requires to be updated
• Issues related to the wiring