Error Code P2829: What It Means & What To Do?

<<See All OBD Codes

The trouble code P2829 can be explicated as Pressure Control Solenoid K Perf/Off Issue. The automatic transmission can shift easily as per the driving needs because of the presence of shift timing solenoid and the pressure control solenoid. It is the transmission control module which checks well as controls the functionality of the solenoids.

The specific sequence that solenoid valves operate varies depending on the manufacturer. Each transmission manufacturer uses solenoid valves in different combinations based on their individual design. However, if code P2829 is present, the transmission will contain pressure control solenoid K, on the valve body in some form. Pressure control solenoids are numbered alphabetically, so solenoid K indicates there are at least eleven solenoids on the valve body.

What causes this problem with the Pressure Control Solenoid K Perf/Off?

• Faulty pressure control solenoid “K”
• Malfunctioning automatic transmission fluid
• There can be inoperative wiring harness
• TCM might be flawed
• Some issues related to the ECM
• Imperfect Pin/connector

1. Engine Control Module - There can be some engine performance issues due to faulty engine control module. If the ECM fails or has any problems it can lead to performance issues with the vehicle like misfires, hesitation, loss of power, and sometimes even decreased fuel economy.
2. Powertrain Control Module - PCM stands for powertrain control module. It is a car part, a control unit which is utilized on motor vehicles. It is generally a combined control unit, consisting of the engine control unit (ECU) and the transmission control unit (TCU).
3. Electronic Control Unit - If your automobile's check engine light remains on constantly, and never goes off, there's a good chance that your vehicle has a damaged electronic control unit. There are a lot of reasons why a car's check engine light will remain on. The most common reason is a defective ECU.
4. Diagnostic Tools - It is always advisable to use the correct tools and equipment while resolving any OBD code issue as even small mistakes can lead to wrong diagnosis. Thus, always take help from a professional who has the knowledge and experience to such tools in an efficient manner. Buy new quality diagnostic tools from us today!
5. Auto Transmission Shift Solenoid - If the TCM is unable to open the shift solenoid with the help of power or ground, it may store P2829 in the system due to faulty shift solenoid. Check and replace faulty solenoid now!
6. Automatic Transmission Valve Body Kit - A lot of issues can arise due to defective transmission valve. Thus, it will affect the transmission process and the shifts can be erratic. Replace it now!
7. Automatic Transmission Filter - If there is a whining sound with delayed response from the transmission, it can be due to faulty transmission filter. Replace the damaged or clogged filter now!
8. Engine Wiring Harness - It is an important auto part which needs full care. A faulty Engine Wiring Harness can be a reason behind the flashing up of P2829 code.
9. Automatic Transmission Fluid - Always make use of correct transmission fluid and make sure that the levels always remain optimal. Thus, buy transmission fluid now!

Well, if you are looking to know about the common symptoms related to this error code P2829, we have worked out a small list to help you discover this error code with your vehicle.

Common Symptoms

• Inferior driveability
• Bad acceleration
• Fixed in gears
• Unpredictable shifting
• Ineffective shift timing
• Diminishing performance
• Transmission sliding

Once you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle.

• Carefully adjust the faults in the shift/timing solenoid valve circuit
• Make sure to mend the faulty pump in the transmission
• It is essential to restore the mechanical failures in the transmission
• Rehabilitate the dirty transmission fluid
• Repair or replace the quirky pressure control solenoid pack
• Clear the internal transmission fluid passages which have been blocked
• Malfunctioning TCM or PCM should be repaired or replaced as per the need

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Transmission Control Module, Shift Solenoid Valves, Pressure Control Solenoid, Transmission Valve Body, PCM, Connectors, Torque Converter, Transmission Pump and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P2829 code to be stored:

You must always start with a technical service bulletin search for your particular vehicle. It is essential to inspect the automatic transmission fluid. You must change your fluid if it is grimy, smells burnt, overfilled and unusual colour. If you've owned your vehicle for 30,000 to 60,000 miles and you do not remember when was the last time you changed your fluid or have any records of it, not only may this be your issue, but you should follow your maintenance schedule to avoid this situation. Former fluid is mucky fluid, grimy fluid can cause blockages and blockages can be a big reason this fault code is appearing so you must change your fluid! The manufacturers recommended steps should be followed properly when you are inspecting ATF. This basic step can differ a meaningful amount between the models as well as makes.

The fluid is in nice condition, code is still present and symptoms exist? It all depends upon your specific model; the shift solenoid may be accessible externally. Now if you find out that this is the case, then you should check the solenoid and its harness/connectors to find out the signs of defect. All the issues should be repaired or replaced as per the need. It would be helpful if you will have a peak for any leaks as well! If your shift solenoid is internal, then you should attempt to access it, work around it for now. Exhaust other avenues, internal transmission diagnosing and repairing should be left to a certified technician. The TCM and harnesses involved in this circuit may be subject to rasping road conditions so make sure everything is complete in all aspects.

After that the pressure control solenoid should be inspected. You may be able to test the solenoid itself multiple ways. One test may include a resistance test where you use a multimeter to measure the resistance between the pins in the solenoid to verify to a degree its electrical integrity. Then the other would include manually applying voltage to the solenoid to verify its mechanical operation. You should specify either one in your manufacturer’s service manual/technical literature.

The circuit from the TCM should be tested properly. Then check the functionality of the sensor and its circuit by performing the same tests as above but from the pins at the TCM and/or ECM. This trick would be very helpful in verifying the integrity of the solenoid as well as electrical integrity.

Common Mistakes When Diagnosing The P2829 Code

One of the most common mistakes when you are diagnosing the P2829 trouble code is that you do not inspect the pressure control solenoid circuit when the shift solenoids are being replaced. The technicians should keep this thing in mind that they must look electrical components before replacing any parts which can give rise to P2829 error code