Guide To P2827 OBD Error Code Solutions

<<See All OBD Codes

Is the car’s transmission continuously slipping along with sluggish acceleration? Is there a problem of decreased fuel economy along with vehicle not starting in the 1^st gear? Is the car’s check engine light illuminated on the dashboard? All these are an indication towards a problematic transmission pressure control solenoid “J”, thus resulting in OBD code P2827 error getting stored in the powertrain control module (PCM).

OBD code P2827 means Pressure Control Solenoid “J” Control Circuit High Issue.

If the powertrain control module finds loss of pressure or reduced output due to faulty pressure control solenoid, OBD code P2827 gets stored. This may lead to faulty transmission shifts with occasional stalling and drivability issues.

What causes this problem with the Pressure Control Solenoid “J” Control Circuit High?

• Wrong level or dirty transmission fluid
• Failure inside transmission
• Clogged fluid filter or worn pump
• Blockage in transmission main control
• Faulty solenoid, torque converter clutch or internal blockage
• Faulty shift wirings or solenoids
• Faulty transmission control module
• Torque converter clutch faulty

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
3. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
4. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!
5. Automatic Transmission Solenoid - If the solenoid is damaged, the gear shifts may be delayed causing drivability issues. Thus, replace it now!
6. Transmission Control Module - The TCM monitor the transmission system of the vehicle and if it becomes faulty, the vehicle will have transmission performance issue. Thus, replace and reprogram it now!
7. Automatic Transmission Sensor - It is important to note that the transmission sensor plays a vital role in the working of the TCM in relation to the PCM as well. Thus, replace faulty sensors now!
8. Automatic Transmission Connector - Faulty or damaged connectors will cause performance issues and thus should be replaced at first instance for proper functioning of the PCM and the TCM.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2827 here:

Common Symptoms

• Harsh shifting
• Transmission slippage
• Transmission overheating
• Decreased fuel efficiency
• An OBD stored code in the PCM
• Illuminated malfunction indicator lamp

Here are some ways with the help of which you will be able to correct the OBD Code P2827.

• Checking for transmission fluid or changing the transmission fluid
• Defective pressure control solenoid “J” replacement
• Replacing or reprogramming Transmission Control Module
• Faulty wiring and/or connectors for a damaged transmission control circuit replacement

Apart from this, you might need to replace other damaged parts too like Pcm, Pressure Control Solenoid, Transmission Gear, Transmission Control Module, Transmission Valve Body, Transmission Pump, Transmission Filter and more. You can easily find all these parts with us. Not only that you can get these parts shipped to your door free, if your cart value happens to exceed $99.

Here are some steps which you should follow in order to diagnose this P2827 fault code:

• Make use of a digital volt ohm meter (DVOM) for the complete test. Continue through the tests until the problem is confirmed. You will also need a basic OBD code scanner to reset the computer and erase the code.
• First check the level and quality of the transmission fluid. If the fluid is low, add more and retest the system.
• If the transmission fluid appears dirty or contaminated, and/or it smells burnt, the mechanic will flush the system, change the transmission fluid, clear the code, and retest once more.
• Inspect and test the transmission for internal mechanical problems, circuit problems, and issues with the pressure control solenoid resistance and continuity. After each repair, they will clear all codes and retest the vehicle to see if the P2827 code appears again.

Common Mistakes When Diagnosing the P2827 Code

The most common mistake while diagnosing P2827 code is misdiagnoses of an engine misfiring issue or a problem with the vehicle’s drive line. If the system is not thoroughly inspected and diagnosed, it can also look like an internal transmission problem when it’s actually a much simpler and less expensive issue