P2826 OBD Error Code: Problem & Solutions

<<See All OBD Codes

If you are experiencing unusual response of the throttle, lack of power from the car engine, impact on the fuel economy, engine stalling and harsh shifts and frequent illumination of the Check Engine Light, it might be an indication of the OBD Code P2826 error.

When the code P2826 appears in your powertrain control module (PCM), it means that the PCM is not reading the correct electrical voltage drops from the Pressure Control Solenoid as it does its job. It may also be that the PCM reads the correct electrical readings but that the Pressure Control Solenoid has malfunctioned.

What causes this problem with the Pressure Control Solenoid “J” Control Circuit Low?

• Dirty, contaminated, or degraded transmission fluid
• Low transmission fluid level
• Mechanical failure of transmission components
• Internal pressure losses
• Clogged fluid passages
• Malfunctioned pressure control solenoid
• Transmission speed sensor faulty
• Transmission torque converter issues

1. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
2. Automatic Transmission Connector - Damaged connectors will affect the functionality of pressure control solenoid and thus must be replaced as quickly as possible..
3. Automatic Transmission Module - Faulty transmission module can cause problematic down shifts and upshifts, leading to stalling while accelerating or slowing down. This can also hamper many transmission system parts. Thus replace it now!
4. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
5. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
6. Diagnostic Tool - In order to fix these errors, you need a few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come in handy to do so and resolve all your vehicle problems. Visit today!
7. Automatic Transmission Solenoid - If you are experiencing roughness during shifting of gears, it is most likely because of too much fluid pressure in the hydraulics or because of a malfunctioning transmission solenoid.
8. Automatic Transmission Sensor - If the signals are lost from the transmission speed sensors, the PCM will set a DTC and illuminate the Check Engine Light on the vehicle dashboard. It also can indicate that there is an increase in tailpipe emissions is occurring that surpasses acceptable limits for environmental contaminants from motor vehicles. Thus, replace it immediately.
9. Auto Transmission Torque Converter - A bad torque converter will take the transmission longer to engage the engine, resulting in higher than normal stall speeds. Thus, replace the faulty component now!
10. Transmission Fluid - Low transmission fluid symptoms also include the slipping of the engaged gear. It does not let the gear to stay in the mode you have selected. If the fluid level is right, the culprit must be the residue build up that impedes the fluid to flow freely.
11. Automatic Transmission Filter - If the gears grind for no reason or the vehicle surges when the gears are changed, the problem may be a result of a dirty or malfunctioning transmission filter. Thus, replace the faulty filter now!

If you are facing OBD error code P2826, then there are significant common symptoms that can be felt or observed. We have worked out a list here to help you out in understanding this problem better.

Common Symptoms

• Stored trouble code and an illuminated warning light
• Reverse gear engagement delayed, or may not engage at all
• Transmission slippage
• Erratic gear shifts and delayed response
• Affected fuel economy
• Malfunction indicator light on

It is very important to fix the fault code P2826. So here are some ways with which you can correct this issue:

• Transmission fluid replacement
• Transmission range switch replacement
• Repairing an open or short in the wiring harness or replacing it
• Park/neutral position switch repair or replacement
• Replace transmission pressure control solenoid
• Broken electrical connections repair or replace

To do all this, you will need a few high-quality auto parts such as Pcm, Pressure Control Solenoid, Transmission Gear, Transmission Control Module, Transmission Valve Body, Transmission Pump, Transmission Filter and so on. From where will you get them? From your local store? Well, why go there when you can order quality parts with us while sitting in the comfort of your home. So, just browse through our website and order your needed parts today.

If you want to easily diagnose this fault code P2826, then all you have to do is to follow the steps which are mentioned below:

• The P2826 code should be diagnosed with an OBD-II trouble code scanner. A trained technician will look at the freeze frame data on the scanner to assess the code, and to check for the presence of any other trouble codes.
• The mechanic will begin by visually inspecting the electrical components in the transmission circuit. Any wires that are shorted, connectors that are open or corroded, or fuses that are blown will need to be replaced.
• Check the dipstick to make sure that the transmission fluid is not low and refill if required. Look at the fluid to determine if it is clean and replace, if needed.
• Smell the fluid to determine if there is a burnt odour. If the fluid smells burnt, remove the transmission pan to check for debris. Also check for burnt wiring and faulty circuitry.
• Inspect the transmission to determine if damage has occurred that will require extensive repairs. Perform a pressure control solenoid continuity test to check for open or short in the circuit.
• Check for Transmission Control Module and Powertrain Control Module faults that may require repairs, reprogramming or replacement. Although, it is rare but still must not be rules out.

Common Mistakes When Diagnosing the P2826 Code

It is important to follow the diagnostic steps properly to correct the OBD code P2826 error. Following are the problems that can be missed and are mostly the reason for this kind of problem:

• Internal transmission failure
• Powertrain Control Module (PCM) failure
• Transmission Control Module (TCM) failure
• Transmission valve body failure
• Wiring issue and connector problems
• Automatic transmission solenoid faulty