P2766 OBD Error Code: Problem & Solutions

<<See All OBD Codes

A decrease in the fuel consumption and the engine performance along with occasional engine stalling and not starting with improper throttle response may be an indication of problems with the transmission system hampering the engine’s performance, thus indicating OBD Code P2766.

A P2766 trouble code is related to the communication between a vehicle’s engine and transmission. When the input speed sensor “B” does not receive a signal that is within the manufacturer’s parameters, a P2766 will illuminate as the transmission will not be able to read the engine RPMs to shift properly.

What causes this problem with the Input/Turbine Speed Sensor "B" Circuit Range/Performance?

• A faulty electronic pressure control solenoid
• Mechanical issues with the transmission
• Failed input and/or output sensor
• Faulty sensor wiring and connectors
• Fuel passages blockage
• Low levels of transmission fluid
• Contaminated transmission fluid
• A faulty transmission control module
• A faulty PCM (this is a very rare occurrence though)

1. Engine Control Module - ECM faults are rare but can be a big problem as faulty ECM will cause wrong vehicle operations and can also result in wrong OBD codes getting stored in the system which can also cause misdiagnosis. Thus, replace faulty ECM components now!
2. Electronic Control Unit - The ECU coordinates with the temperature sensor to control the blower fan for keeping the battery temperatures under control. So, replace faulty ECU components now!
3. Powertrain Control Module - Check for PCM error which might be due to circuit faults that might require complete replacement and reprogramming. Replace it now!
4. Diagnostic Tool - In order to detect the error, one needs high grade diagnostic tools. Visit us today to grab amazing deals.
5. Automatic Transmission Solenoid - A delay in shifting due to failed transmission solenoid can last as little as a few seconds or even longer, possibly a minute or longer. During this period the car can act as if it’s in neutral and you won’t be able to accelerate.
6. Transmission Control Module - Faulty TCM can cause delayed transmission response and slipping. It can also cause hard shifts and gear stuck in neutral along with problems during downshifting,
7. Automatic Transmission Sensor - A problematic transmission sensor can impact the shift timing, extending the interval between transmission shifts. An automatic transmission is hydraulically controlled and designed to shift smoothly. When the transmission shifts hard, it can damage internal components including valve bodies, hydraulic lines, and in some cases mechanical gears.
8. Auto Transmission Torque Converter - Transmission slipping is a common problem with the torque converter, as fluid cannot be managed correctly. If not enough or too much fluid is passed to the transmission, it can cause gears to slip and you will often feel a loss of acceleration. You might also notice a sudden drop in your car’s fuel economy.
9. Automatic Transmission Connector - Transmission connectors can be at fault causing various transmission sensor and solenoids not to function properly. Thus, replace faulty connectors now!
10. Transmission Fluid - Dirt or gunk in the fluid is the primary reason for having a sluggish response from the transmission. No matter whether you drive a manual or automatic, the oil in the gearbox has to be clean, free of any dirt residue so that it can flow inside the parts without any snag. Thus, replace dirty fluid immediately.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2766 here:

Common Symptoms

• Delayed shifting or vehicle not shifting into the right gear
• Transmission slipping
• Harsh shifts and stuck gear
• Decrease in fuel efficiency
• Check Engine Light illumination

Want to correct the Trouble Code P2766? Read these points mentioned below:

• Repair or replace any corroded or damaged wires in and around the transmission control module
• Replace transmission fluid and wiring, if not in working condition
• Replace faulty speed sensor
• Repair or replace problem with the pump
• Replace faulty shift solenoids
• Replace transmission pressure control solenoid
• Replace faulty torque converter

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Ecm, PCM, Transmission Control Module, Output Speed Sensor, Shift Solenoid, Engine Temperature Sensor, Valve Body, Transmission Fluid, Crankshaft Position Sensor and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P2766 code to be stored:

• Begin with a visual inspection of all wiring and connectors. Repair or replace damaged, disconnected, shorted, or corroded wiring, connectors, and components as necessary.
• Retest the system after repairs are completed to ensure success. If all system wiring, connectors, and components appear to be in normal working order, connect the scanner (or code reader) to the diagnostic connector and record all stored codes and freeze frame data.
• Check the fluid in the transmission should be checked for quality, and the level of fluid prior to further diagnostic tests. Replace old or dirty fluid as required.
• Perform a torque converter stall speed test to determine if the engine stall speed is within factory specifications. The engine speed must match the readings from the transmission speed sensor.
• Perform a continuity test for the transmission pressure control solenoid output and check for the faults. Replace the faulty solenoid immediately.
• Faulty TCM (Transmission Control Module) and PCM should also be repaired, reprogrammed or replaced as required.

Common Mistakes When Diagnosing the P2766 Code

• Some of the common mistakes done while changing diagnosing the OBD code P2766 are:
• Directly replacing the TCM without evaluation
• Simply replacing the Powertrain Control Module (PCM) without considering other possibilities of problem
• Not checking the damaged or loosened wiring and circuit problems