Error Code P2692: What It Means & What To Do?

<<See All OBD Codes

If your diesel powered vehicle has stored a code P2692, it means that the powertrain control module (PCM) is unable to detect the presence and functioning of cylinder 7 fuel injector. This may also cause performance issues and increased emissions from the exhaust with Check engine light flashing on the vehicle dashboard.

The reason for every injector having a unique calibration number is that the computer that runs the car doesn’t know exactly what each injector flows, only what they are “supposed” to be flowing. The computer does the calculations, and adjusts the pulse widths (how much fuel is effectively being squirted by the injector) to match the engine fuel needs. Thus the PCM and the GPCM (Glow Plug Control Module) continuously works on the injector flow rate to administer its functioning.

When the PCM and/or GPCM are unable to detect the cylinder 7 fuel injector, OBD code P2692 gets stored in the system.

What causes this problem with the Cylinder 7 Injector Data Incompatible?

• Cylinder 7 fuel injector inoperative
• Fuel injector sensor circuit damaged
• Faulty injector circuit wiring and harness
• Open or short in the electrical connections
• Programming error in PCM and GPCM

1. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
2. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
3. Engine Wiring Harness - Your car ECM would not operate properly if there are some cracks or break in the engine wiring harness. Corrosion as well as physical damage are the most common reasons why you should replace an engine wiring harness. Purchase high grade engine wiring harness online from Parts Avatar Canada.
4. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
5. Fuel Injector – The fuel injector meters the fuel more precisely than a carburettor. Therefore, no fuel is wasted. The result of such precise metering is increased power, lower emissions and lower fuel consumption. The right amount of fuel is squirted into the combustion chamber or throttle body. Thus, replace faulty fuel injector today!
6. Diagnostic Tool - In order to fix these errors, you need a few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come in handy to do so and resolve all your vehicle problems. Visit today!
7. Injector Connector – Damaged or broken injector connector will lead to fuel injector not working causing major performance issues. Replace it now!

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2692 here:

Common Symptoms

• Reduced/abnormal engine performance
• Affected fuel efficiency
• Lean exhaust codes
• Engine Misfire codes stored
• Reduced acceleration and throttle response

Want to correct the Trouble Code P2692? Read these points mentioned below:

• Cylinder 7 fuel injector replacement
• Circuit wiring and connector replacement
• Controller and PCM reprogramming

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of fuel injectors, PCM, glow plug control modules, detective fuel injectors, injectors connectors, damaged injector wiring, connectors, disconnected ground wires to the PCM and a lot more. We are sure that now all your issues would be resolved.

Here are some steps which you should follow in order to diagnose this fault code:

• Late diesel powered vehicles, the fuel injectors had specific identification numbers for the controller to recognise them individually.
• If the controller or the injector is replaced, the information will not be present in the program and will cause error to occur. The CAN (Controller Area Network) is responsible for communicating with the microcontrollers for various operations to take place.
• Thus, it becomes important to understand the complex wiring and connections in association with the CAN and to replace the damaged physical components immediately. Also, it is important to reprogram the CAN correctly so that it can correctly identify the existing or new fuel injectors.
• Unlike other diagnostic codes, this type of code must be held by a professional because of the complexity involved. With the help of an experienced technician and specialized scanner determine the general area of the malfunction to resolve OBD code P2692.
• It is important to understand the complexity of the situation and the control modules involved. Testing every single probe can take hours and if you miss even a single one, everything can go back to square one. Thus, extensive and detailed diagnosis is required.
• Also the fuel injector components may also be faulty. Check for damaged, burnt or broken wiring and connectors and replace them immediately. Look for loose electrical connection to the circuit and mend them immediately.
• Always compare your readings with the manufacturer’s specifications and repair or replace the required component if the reading are out of range.

Common Mistakes When Diagnosing The P2692 Code

• Check for damaged or worn out wiring and connectors to various components for the fuel delivery system and replace them first
• Check for faulty fuel injector and system
• Inspect for PCM failure that can be corrected with reprogramming
• Check for clogged fuel filters and clean of replace as required