P266D OBD Error Code: Problem & Solutions

<<See All OBD Codes

Is your car ever diagnosed with OBD error P266D? Did your mechanic told you that it's some problem related to your vehicle’s rocker arm assembly? Were you able to understand him completely? Well, If not then we are here to help you out! We have detailed information on error code P266D for you to have a look. Chances are that after reading all the information you will be in a position to understand your car problem completely. Maybe you can solve it yourself too, so why not read through it?

P266D error code is related to your vehicle’s “A” rocker arm actuator position sensor bank 2 circuit. OBD error code P266D will be set by your vehicle’s engine control module or powertrain control module when it senses signals from “A” rocker arm actuator position that are out of factory specifications. To know about its few common causes, take a look at the section below.

What causes this problem with the A Rocker Arm Actuator Position Sensor Circuit High Bank 2?

• Wrong type of engine oil usage
• Engine oil level being low or more than needed
• “A” rocker arm actuator sensor being faulty
• 'A' rocker arm actuator sensor harness being open or shorted
• Poor electrical connections

1. Engine Control Module - Engine Control Module of your car is also known as the car’s brain.It is extremely essential to keep your vehicle’s ECM in good shape to avoid any sort of performance issues with your car. If you need one to get rid of this OBD error code P266D then you can easily find one with us and that too at the most economical prices.
2. Powertrain Control Module - A faulty powertrain control module (in rare cases) can lead to various problems. Thus you must check and replace it, if required to get rid of this error code P266D.
3. Electronic Control Unit - This responsible for coordinating the cooling system to control the battery operating temperatures and thus must be replaced if found faulty. Thus, buy new ECU modules and components from us!
4. Diagnostic Tools - You can choose from a wide selection of diagnostic tools like OHMmeter and more on our website and make it easy on yourself when diagnosing problems and creating accurate solutions for your car.
5. Rocker Arm - If your vehicle’s rocker arm is damaged then it can result in reduced engine performance, something that we are sure you really don’t want for your vehicle. If you need one for your vehicle, buy them today with us

After knowing all the cause behind the issues, let’s have a look at a few common symptoms of this problem. Read through this section to learn more about this error code P266D.

Common Symptoms

• Poor engine performance
• Poor fuel economy
• Flashing check engine light

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue you need to follow certain steps, and to solve OBD error code P266D, you will need to undergo the following replacements:

• Flush out the wrong type of engine oil and refill with the right one
• Next step is to make sure that engine oil is filled to the right level
• Undergo faulty rocker arm actuator sensor replacement
• Make sure to repair or replace all the faulty wirings, connectors and harnesses related to rocker arm assembly
• Make sure that all the electrical connections are in good shape

Apart from this, you might need to replace other damaged parts too like PCM, Rocker Arm Assembly, Valve Lift Controller Assembly, Rocker Arm Actuator, ECM and more. You can easily find all these parts with us. Not only that you can get these parts shipped to your door free, if your cart value happens to exceed $99.

In order to be that DIY guy and to be able to diagnose your vehicle’s problem yourself you will need to keep in mind the following precautions:

• Start by carefully examining the crankshaft and camshaft positions using electromagnetic sensors. Begin a proper diagnosis by making sure that all engine timing indicators are properly aligned. Check the test belt or chain deflection using manufacturer’s specifications.
• Next, test the VVT or VCT solenoids and circuitry if timing components prove to be properly aligned and in good working order. Check and replace faulty electrical wiring and connectors as they are more prone to fail than sensors, especially where oil or other corrosive fluids are present.
• Make use of an OBD-II scanner (or code reader), a digital volt/ohmmeter, and an oscilloscope to diagnose this error. Repair or replace damaged, disconnected, shorted, or corroded wiring, connectors, and components as necessary. Always retest the system after repairs are completed to ensure success.

If all system wiring, connectors, and components (Including fuses) appear to be in normal working order, connect the scanner (or code reader) to the diagnostic connector and record all stored codes and freeze frame data. Inspect the PCM for any errors and reprogram it, if necessary.

Common Mistakes When Diagnosing the P266D Code

If you wish to diagnose this OBD error code P266D on you own, make sure you avoid misdiagnosis of any sort by taking care of the following failures:

• Malfunctioning powertrain control module
• Failing variable valve lift controller
• Issues with the system wirings