P2634 - OBD Trouble Code

<<See All OBD Codes

After observing an unusual performance by your vehicle, you finally got it checked and found out that an OBD code was set. Well, the P2634 code is a generic code and is defined a Fuel Pump "B" Control Circuit High. While this may not make any sense to you now, we will inform you all about it so that you can diagnose and resolve this code, potentially all by yourself.This code is set by your vehicle’s Powertrain Control Module (PCM), when it detects a problem with the fuel pump.

The job of the fuel pump is to move fuel from the tank to the fuel injectors so that they vehicle has constant/continuous supply of gas. When there is a problem with the fuel pump B control circuit, the P2634 code is set. This problem is typically detected by the PCM itself, but other module too can detect this issue. Some of these include instrument panel control module, alternative fuel control module, fuel injection control module, climate control module etc.

What causes this problem with the Fuel Pump "B" Control Circuit High?

• Issue with the fuel pump
• Fuel relay is having defects
• The wiring and electrical connectors are open, shorted or damaged via corrosion
• Malfunction of the CAN bus
• The ground wire is broken
• Control module ground strap has loosened

1. Engine Control Module - Is the central module that controls and monitors the functioning of all the other modules in your vehicle. The ECM functionality is vital for your car. Resolve any issues you have found with it via repairs or replace easily with PartsAvatar we offer free shipping on orders above CAD $99. This may help you get rid of the P2634 code.
2. Fuel Pump - This is an integral part of your vehicle combustion system. Its responsibility is to pump the needed quantity of fuel from the tank to the vehicle engine at correct pressure. An issue with the fuel pump can cause the P2634 code to set. Try to repair it or go for replacement. You can find vehicle compatible fuel pumps on PartsAvatar. It’s super easy and convenient, you will receive your order in just a matter of days!
3. Fuel Pump Relay - This is an electronic component in your internal combustion engine vehicle. It helps start the car by pressurizing the fuel system. It does this for the first few seconds before the oil pressure level is able to take over. You may have the P2634 code set due to a faulty fuel pump relay. Resolve this problem by repairs or replacement as needed. Find a wide range of quality fuel pump relay at PartsAvatar, these are priced good too. Order online and track it till it reaches your doorstep.
4. Fuel Pump Control Module - Is a relay system which releases power to operate the fuel pump. This enables the fuel pump to let fuel into the vehicle. A faulty fuel pump control module can have the PCM set P2634 code. Try to repair it and see if the code goes, otherwise you will have to replace it. You can find replacements at the comfort of your home at PartsAvatar. We ship to the remotest corners of Canada from our warehouses.
5. Powertrain Control Module - Is the boss of your car that manages all the other modules in your vehicle. Find PCM replacement at PartsAvatar and save on cross border shipping and customs. We offer free shipping on orders above CAD $99 with no hidden costs.
6. Wheel Speed Sensor - Is a type of tachometer. It reads the speed of the vehicle’s wheel rotation and passes on the information to the PCM. Solve the P2634 code by repairs or replacement.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2634 here:

Common Symptoms

• Reduced engine performance
• Engine starting problems

Want to correct the Trouble Code P2634? Read these points mentioned below:

• Thoroughly inspect the wires and connectors, and repair them. If needed replace those beyond repair.
• All the corroded, broken, shorted connectors and wires will have to be repaired or replaced
• Repair or replace the fuel pump control module

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced ECM, Fuel Pump, Fuel Pump Relay, Fuel Pump Control Module, PCM, Wheel Speed Sensor and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P2634 code to be stored:

Start by connecting your OBD-II scanner and download all the codes stored. This will help in understanding what issues are present and how to resolve them strategically. Reset the codes and go for a test drive to see if the code returns, sometimes intermittent codes are also set. If the code does return then you will have to continue your diagnosis to resolve the P2634 code that has been set.

Perform a thorough inspection of all the electrical systems related to the module. You will have to be observant and see if there are any damages present, like burned or chafed connector pins, shorted or burned wires. Any other issues that may have caused damage to the circuitry. Once you have spotted them you will have to try to repair them and see if the code still returns otherwise, opt for replacement.

Common Mistakes When Diagnosing the P2634 Code

• A problem with communication within the vehicle can impact the diagnosis be careful about that
• Not being able to find the root problem for the code to be set