Guide To P2633 OBD Error Code Solutions

<<See All OBD Codes

This OBD-II code is caused due to incorrect signals being sent from the Fuel Pump to the Powertrain Control Module (PCM). It is defined as a Fuel Pump "B" Control Circuit Low. The PCM will set the P2633 code so that the issue can be resolved by the driver

The P2633 is a generic OBD trouble code. It basically will make a note of the problem with the fuel pump B control circuit; this refers to the “B” control circuit. Apart from the PCM other modules too can pick up an issue with this control circuit, and when they do the P2633 code will be set.

What causes this problem with the Fuel Pump "B" Control Circuit Low?

• Fuel pump is not functioning any more
• Problematic fuel pump relay
• The controller area network (CAN) bus is not working
• Wires and connectors in the CAN bus harness are shorted or corroded or open
• Ground wire are broken or damaged
• The control module ground strap has become loose or broken
• You may find that there’s a faulty PCM or other control module too

1. Engine Control Module - This is simply the brain of your vehicle which is responsible for controlling and monitoring the functioning of all the other modules in your vehicle. A solid working ECM is important for your car. Resolve any issues you have found with it via repairs or replace easily with PartsAvatar. You can avail free shipping on orders above CAD $99. This may help you get rid of the P2633 code.
2. Fuel Pump - This is part of your vehicle combustion system. Its prime responsibility is to pump the needed quantity of fuel from the tank to the vehicle engine at optimum pressure. Any faults with the fuel pump can cause the P2633 code to set by the ECM module. You can opt for repairs or replacement. Find vehicle compatible fuel pumps on PartsAvatar. It’s super easy and convenient, you will receive your order in just a few days.
3. Fuel Pump Relay - This is an electronic component in your internal combustion engine vehicle. The relay helps start the car by pressurizing the fuel system. This happens for the first few seconds before the oil pressure level is able to take over. A faulty pump relay can cause the P2633 code to be set. Get rid of this code by repairs or replacement as per need. Find a wide range of quality fuel pump relay on PartsAvatar at competitive prices. Order online and track it till it reaches your doorstep.
4. Fuel Pump Control Module - In simple words is a relay system which releases power to operate the fuel pump. This enables the fuel pump to let fuel into the vehicle. Try to repair the faulty module and see if the code goes, otherwise you will have to replace it. You can find replacements at the comfort of your home at PartsAvatar.
5. Powertrain Control Module - Is the central processing unit of your car that manages all the other modules in your vehicle. Find PCM replacement at PartsAvatar and save on cross border shipping and customs. We ship to the remotest corner of Canada, so don’t worry about where you are located.
6. Wheel Speed Sensor - This sensor is primarily a type of tachometer which reads the speed of the vehicle’s wheel rotation and passes on the information to the PCM. Solve the P2633 code by repairs or replacement.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2633 here:

Common Symptoms

• Lowered performance of engine
• Issues with starting the

Here are some ways with the help of which you will be able to correct the OBD Code P2633

• Repair or replacement of the fuel pump
• Repair the damages the fuel pump relay or replace it
• Inspect issues with the wires or connectors in the CAN bus and repair or replace them
• Repairing the problems present of the CAN bus

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade ECM, Fuel Pump, Fuel Pump Relay, Fuel Pump Control Module, PCM, Wheel Speed Sensor and a lot more for our precious customers.

Here are some steps which you should follow in order to diagnose this fault code P2633:

• Connect the OBD scanner to the diagnostic port of your vehicle and retrieve all the codes that are set. Freeze frame the data and also make a note of all the codes in their order of appearance. Reset the codes and go on a test drive to see if the code persists or if the PCM enters readiness mode. If the latter happens then there may be an intermittent condition present, in the case of the former you will have to continue diagnosis.
• The diagnosis will start with inspecting the electrical circuitry, wires and harnesses. All damages like burning, broken, or chafed wires and harnesses will have to be repaired or replaced. Connectors may have bent pins or be corroded; these too will have to undergo either repairs or replacement so that they can function properly. If no problems were noted here, or once they have repaired the next step would be the inspection of the CAN bus and the fuel pump. The CAN scanner will be needed to inspect the CAN bus, this is the perfect tool for performing this step.
• It is important that after every step of repairs or replacement, the code is reset to note if that helped with the problem. Otherwise lengthy diagnosis will occur and unnecessary replacements too, this will be expensive time consuming and unnecessary.

Common Mistakes When Diagnosing the P2633 Code

• Not following the OBD diagnostic steps
• Replacing fuel pumps or fuel pump relays because of not following the correct steps of diagnosis
• Prematurely replacing the PCM when there’s an issue with other modules