Guide To P258C OBD Error Code Solutions

<<See All OBD Codes

If the vacuum pump is not working properly, the first symptom may be that the brake pedal is not responding properly. Also, one might notice Check Engine light getting illuminated as well as affected fuel economy and vacuum leaks. When the vacuum pump control circuit resistance or voltage value is lower than expected, OBD code P258C gets flashed.

Vacuum pumps are used in motor vehicles in which the necessary vacuum cannot be generated in the intake manifold. These are direct injection engines, turbo engines and engines with variable valve timing, for example. The increasing number of pneumatic actuators can also render the use of a vacuum pump necessary.

With pneumatic devices, high actuating forces can be achieved in a small installation space. Brake boosters, secondary air valves, EGR valves, switched intake manifolds, turbocharger control and comfort devices are just some examples. Since failure of the brake boosters can lead to dangerous situations, the vacuum pump is considered to be a safety component.

What causes this problem with the Vacuum Pump Control Circuit Low?

• Vacuum pump control circuit issue
• Affected circuit wiring and connectors
• EVP relay and hose faulty
• PCM programming faults

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is the in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
3. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
4. Diagnostic Tools - Take help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!
5. Vacuum Pump - Most vacuum pumps are located on the left or right side of the engine, typically closer to the brake master cylinder on diesel vehicles. The vacuum pump requires oil to maintain proper lubrication and to reduce internal temperature due to its frequent use. If you notice oil is dripping from the left or right side of your engine, it may be coming from the vacuum pump. Have a mechanic examine this problem regardless of where you might think the oil is leaking, as it can lead to major mechanical component failure if not fixed.
6. Vacuum Pump Repair Kit - It is important to understand that there can also be minor problems leading to vacuum leaks which can be easily fixed without hefty expenses and replacement costs. Thus, use the pump repair kit to carry out such repair works. Buy the repair kit from us now!
7. Vacuum Pump Belt - Damaged or broken pump belt can lead to lack of vacuum pressure and thus can affect the brake booster functions, which will in turn hamper the braking system. Thus, replace damaged belt now!

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P258C code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• Affected air conditioning system
• Brake pedal unresponsive
• Increased fuel consumption
• Vacuum leaks causing hissing sound
• PCM faults leading to wrong OBD code getting stored

Learn the ways with which you can correct this trouble code:

• Repair or replace faulty electric vacuum pump wiring and connectors
• Replace damaged vacuum pump hoses that may cause leakages
• Electric vacuum pump repair or replacement
• PCM replacement

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced PCM, Vacuum Pump, Fuel Shutoff Switch, Exhaust Gas Temperature Sensor, Vacuum Pump Relay, Fuel Pump and a lot more to help you out in fixing your car.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• A suitable OBD-II scanner (or code reader) and a digital volt/ohmmeter will be most helpful in performing a successful diagnosis.
• Begin with a visual inspection of all wiring and connectors and repair or replace damaged, disconnected, shorted, or corroded wiring, connectors, and components as necessary.
• Always retest the system after repairs are completed to ensure success. If all system wiring, connectors, and components (Including fuses) appear to be in normal working order, connect the scanner (or code reader) to the diagnostic connector and record all stored codes and freeze frame data.
• Continue by clearing the code and operating the vehicle to see if it returns. This will help to determine whether or not the malfunction is intermittent.
• Test drive the vehicle afterwards to ensure that a successful repair was performed. If the oxygen sensor conforms to the manufacturer’s specifications, prepare to test system circuits for resistance and continuity by disconnecting the electrical connector/s from all related control modules (especially the PCM)
• Compare your actual findings with manufacturer’s specifications and repair or replace circuits, components, or connectors as required.
• Once the repairs are made, clear the codes and test drive the vehicle to ensure that the repair was successful. If oxygen sensor and system circuits are comparable to the manufacturer’s specs, suspect a defective PCM (or another related controller).

Common Mistakes When Diagnosing the P258C Code

• Electric vacuum pump failure
• Faulty relay
• Faulty circuit wiring and connector