Error Code P247F: What It Means & What To Do?

<<See All OBD Codes

Flashing of the check engine light and fall in overall engine performance will be accompanied with the symptoms of the error code P247F. Your vehicle’s powertrain control module will set this error code when it detects issues with the exhaust gas temperature bank 2 sensor 4. What causes this problem? To know that have a look at the section below.

Remember that your vehicle’s EGTS performs the function of detecting the exhaust gas temperature and converting that into voltage and sends back this to the car’s powertrain control module. This helps PCM to control engine conditions to efficiently reduce exhaust emissions. OBD error code P247F will be set by your vehicle’s pcm when it detects that egt bank 2 sensor 4 is out of factory specifications.

What causes this problem with the Exhaust Gas Temperature Out of Range Bank 2 Sensor 4?

• Exhaust Gas Temperature bank 2 sensor 4 being faulty
• Exhaust Gas Temperature bank 2 sensor 4 wires or harnesses being open or shorted
• Exhaust Gas Temperature bank 2 sensor 4 poor electrical connection
• A possible leaking exhaust
• Sensor developing excessive particulate matter buildup

1. Powertrain Control Module - Error code P247F flashing? Yes? Then you must check for PCM error which might be due to circuit faults that might require complete replacement and reprogramming. Replace it now!
2. Exhaust Gas Temperature Sensor - Well, a damaged Exhaust Gas Temperature sensor can damage other internal components and cause the failure of the system. Alter the defective EGT sensor as soon as possible.
3. Diesel Particulate Filter - OBD error code P247F flashing? Chances are that there could be a problem with your vehicle’s DEF, but don’t let that hold you back, fix your def filters and related parts now. You can find with us top notch def parts at the most budget friendly prices.
4. Engine Control Module - You can’t afford to go a long way with your defective engine control module as it will lead no start condition or engine stalling. So, it’s definitely a good idea to replace the damaged ones today. Buy best priced engine control modules with us for all make and models.
5. Engine Control Unit - Having poor engine performance or unexplained drops in fuel economy is associated to defective ECU issues, so what are you waiting for? Replace the bad ones today.

Have you ever wondered why is it so important to know the symptoms of the problem? Well, it is extremely essential to know the symptoms of the problem in order to detect it. Keeping this in mind, let’s throw some light on few common symptoms of OBD error code P247F.

Common Symptoms

• Illumination of check engine light
• Stalling engine
• No start condition
• Overheating engine
• Steep fall in fuel economy
• Fall in overall vehicle performance

After you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle’s.

• Firstly, repair or replace the malfunctioning EGT sensor bank 2 sensor 4
• Secondly, replace all the blown out Fuses
• Thirdly, clean all the corrosion from the connectors
• Fourthly, replace or fix the faulty wirings
• Fifthly, get rid of all the carbon buildup from the sensor
• Sixthly, fix the exhaust leakage
• Lastly, repair or replace the bad car’s ECU

Apart from the fuel injector, you might need to undergo few more replacements. You might need Powertrain Control Module, PCM, Exhaust Gas Temperature Sensor, Diesel Particulate Filter, Engine Control Module, ECU and many other parts. Where to get them from? Well, if you want quality parts, then we can prove to be your dream destination.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

For diagnosis OBD error code P247F look for the technical service bulletins, also known as the TSB’s specific to your vehicle make model and year. Believe us this will save you a lot of time and will guide you in the right direction.

Now, find and locate all the parts within the exhaust gas temperature circuit and undergo a complete visual inspection to make sure there are no defects such as scraping, rubbing, bare wires or burn spots. After this you will need to inspect all the related connectors for any corrosion or defective pins. For those who don’t know this already, the exhaust gas temperature sensor is generally a 2-wire sensor located in your vehicle’s exhaust down pipe. Lastly, remove the exhaust gas temperature and check for any carbon buildup. Also, check for any fuel injector or exhaust leakage.

Common Mistakes When Diagnosing The P247F Code

If you are going to diagnose your vehicle for OBD error code P247F, then make sure that you avoid the following errors

• Problematic EGT sensor
• Bad powertrain control module (PCM)
• Poor wiring