Guide To P247D OBD Error Code Solutions

<<See All OBD Codes

Are you facing exhaust gas temperature sensor codes with your vehicle? Are there excessive exhaust emissions accompanied by increased fuel consumption? If your answer to all these question is YES, then chances are your vehicle is set to OBD error code P247D. You must be wondering now what does this code indicates and how does this affects your engine performance. To get the answers to all your questions you will need to go through the following sections.

If you are wondering what this error code means, then you no longer need to worry over it. We at PartsAvatar are here to help you out with all your P247D error code related queries. The OBD Error code P247D is a generic error code and will be set by your vehicle’s PCM, when it detects that there is some faults with the signals from the EGT sensor Bank 2 sensor 2. Your vehicle’s powertrain control module monitors the signals from the EGT sensors and whenever it detects any variations out of the programmed amount, it will set OBD error code P247D.

What causes this problem with the Exhaust Gas Temperature Out of Range Bank 2 Sensor 2?

• Malfunctioning exhaust gas temperature sensor bank 2 sensor 2
• Open or shorted EGT sensor bank 2 sensor 2 harness
• Poor electrical connection for the EGT sensor bank 2 sensor 2
• Exhaust leakage
• Particulate matter buildup on the EGT sensor bank 2 sensor 2

1. Powertrain Control Module - A faulty powertrain control module can be very detrimental for your vehicle’s health. It can create issues such as stalling while running or failing to start condition. If you need to get rid of these issues you can replace your bad PCM with a new one today with us.
2. Exhaust Gas Temperature Sensor - EGT sensors can also act a guide for optimizing fuel economy. If OBD error code P247D is flashing and you have a falling fuel economy, then all of this indicates towards a needed EGT sensor replacement.
3. Diesel Particulate Filter - Avoid increased vehicle’s emissions and occurence of OBD error code P247D, replace the faulty diesel particulate system and parts today.
4. Engine Control Module - Your vehicle’s Engine Control Module (ECM) if corroded can lead to creating a short within the engine control module. If that happens to your vehicle, it will badly impact your vehicle’s engine performance. If you want to replace the faulty ECM to get rid of this error code P247D, then you can find one with us.
5. Engine Control Unit - This onboard computer if faulty can cause OBD error code P247D and fall in fuel economy. If you are facing this problem then we advise you to undergo it’s replacement at the earliest.

If you are facing OBD error code P247D, then there are significant common symptoms that can be felt or observed. We have worked out a list here to help you out in understanding this problem better.

Common Symptoms

• Fall in fuel efficiency
• Illumination of the check engine light
• Fall in engine performance
• No start condition
• Overheating engine
• Stalling engine

After you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle’s.

• Undergo exhaust gas temperature sensor replacement
• Undergo blown fuse or fuse-able link replacement
• Undergo cleaning corrosion from connectors
• Undergo faulty wiring replacement
• Undergo carbon buildup removal from sensor
• Undergo exhaust leakage replacement
• Undergo car’s ECU replacement

However, if you face any issue then we have stocked a wide range of best priced Powertrain Control Module, PCM, Exhaust Gas Temperature Sensor, Diesel Particulate Filter, Engine Control Module, ECU and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

If you wish to diagnose this OBD error code P247D, then you will need to look for the technical service bulletins, also known as the TSB’s specific to your vehicle make model and year. This will save you a lot of time and will guide you in the right direction. Find and locate all the parts within the exhaust gas temperature circuit and undergo a complete visual inspection to make sure there are no defects such as scraping, rubbing, bare wires or burn spots. After this you will need to inspect all the related connectors for any corrosion or defective pins. For those who don’t know this already, the exhaust gas temperature sensor is generally a 2-wire sensor located in your vehicle’s exhaust down pipe. Last but not the least remove the exhaust gas temperature and check for any carbon buildup. Also, check for any fuel injector or exhaust leakage.

Common Mistakes When Diagnosing The P247D Code

If you are going to diagnose your vehicle for OBD error code P247D, then make sure that you avoid the following errors

• Bad EGT sensor
• Defective powertrain control module (PCM)
• Damaged wiring