P244C - OBD Trouble Code
OBD Code P244C - Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 1
Check engine light blinking” as alarming as it sounds. Not
anymore. With Parts Avatar Canada, your one stop destination for hassle free
shopping and supreme quality parts, we assure you not only the best at rock
bottom prices to keep you on a payroll but also to equip you with a
straightforward guide to crack the OBD’S. Here’s all you need to know about the
OBD code P244C. While the conversion of the leftover exhaust particles into
harmless gases is being performed, the diesel exhaust fluid is used to help.
While the particles are burnt, the temperature of the exhaust system needs to
increase. In order to attain the required temperature in the diesel particulate
filter (DPF), DEF fluid is injected into the exhaust stream. Only then, the
system is able to convert the hazardous NOx to nitrogen, water and carbon
dioxide. Further, reductant catalyst is added to reduce the NOx present in the
exhaust stream. The regeneration process of the DPF fails when the temperature
in the filter gets too low. Hence, the code P244C is set.
Learn More About OBD Error Code P244C
The conditions required for the diesel particulate filter regeneration are regulated by the powertrain control module (PCM). Also, the test tends to fail when the level of the diesel particulate filter regeneration is less than 10% of the target reduction even after 13 minutes of active regeneration.
What causes this problem with the Exhaust Temperature Too Low for Particulate Filter Regeneration Bank 1?
- Problems related to the fuel system
- Malfunction in the turbocharger system (or associated to)
- Exhaust leakages
- A fault in the oxidation catalytic converter (OC)
- Often issues related to the aftermarket exhaust accessories or performance modifications
Replace/Repair These Parts To Fix OBD Code P244C
- Powertrain
control module -
Due to a fault in the powertrain control module, downward emissions are likely
to follow besides a number of other issues like a sluggish engine crank,
failure in the emission system etc. We advise you to get your faulty PCM
changed now by simply logging into Parts Avatar.
- Diesel
exhaust fluid pump - Do
you know that a faulty diesel exhaust fluid pump can of problems like potential
damage to components, including DEF dosing pump and diesel particulate filter
and malfunctions with the machine’s SCR system. Parts Avatar is just the right
place that provides superior quality diesel exhaust fluid pump across the
country.
- Diesel exhaust fluid
injector - Experiencing a loss of efficiency due to a faulty
diesel exhaust fluid injector? Yes, it is likely to lead to complications in
the operations of the system. We advise you to get your diesel exhaust fluid
injector changed right away.
- Exhaust
gas temperature sensor -
Failing emission tests? Engine pings? Check engine light flashing? Well, all
this is triggered due to a faulty exhaust temperature sensor. Tune into Parts
Avatar to get your error code P244C fixed just in the right time.
- Diesel particulate filter -
Problems in the diesel particulate filter also at times triggers problems with
the diesel particulate injectors. So changing one can be one of the wisest
decisions. Now get your new diesel particulate filter delivered right at your
doorstep with Parts Avatar. Log in now so that you don’t miss any of our
amazing deals.
- Fuel
system parts - Malfunctioning fuel system
parts invite a lot of issues like the engine sputtering, loss of power and a
bad gas mileage. We advise you to get your fuel system parts changed or
repaired as soon as possible to get rid of the error code P244C.
- Turbocharger
system parts - Fearing an error code P244C? Well,
damaged turbocharger system parts not only add to the code being stored but
also triggers a number of problems like acceleration issues and shrieking
noise. So what are you thinking change or repair now!
Symptoms Of OBD Error Code P244C
Willing to know some common symptoms of OBD code P244C? Your wish is our demand. Have a look at them below:
Common Symptoms
- A fall in the engine performance
- Engine light flashing on (or service engine soon warning light)
How To Correct P244C Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 1
We have listed out so ways which would help you to correct the occurrence of OBD code P244C. They are mentioned here as follows:
- Repair or replace the defective parts
in the fuel system or the turbocharger system as per the requirements
- Make sure you are able to repair all
the exhaust leakages in the system
- A distorted oxidation catalytic
converter (OC) should be mended or restored right away
- We advise you to thoroughly inspect the
aftermarket exhaust accessories or performance modifications. If there are any
problems present, make sure they are repaired or restored
There is no need to get strained if your OBD code is still flashing up as we are here at your service. Have a look at our superior variety of Pcm, exhaust temperature, diesel exhaust fluid, diesel exhaust fluid injector, exhaust gas temperature sensor, exhaust leak, diesel particulate filter, fuel system, turbocharger system and many more. Now all your problems would vanish within no time.
Easy Diagnosis Of Engine Error OBD Code P244C
A scanner (or code reader) and a digital volt/ohmmeter will be helpful in successfully diagnosing this code-storing condition.Begin your diagnosis with a visual inspection of system wiring, connectors, and components.Repair or replace any open, shorted, damaged, or corroded items as required and retest the system to make sure that repairs were successful. If the system wiring, connectors, and components appear to be in normal working order, connect the scanner to the diagnostic connector and record all stored trouble codes and freeze frame data.This information can be extremely helpful in diagnosing intermittent conditions that may have contributed to this code being stored. After the codes are cleared, operate the vehicle to see if the code returns. If the code fails to immediately return, you may have an intermittent condition.
Common Mistakes When Diagnosing The P244C Code
Here we have listed a few common mistakes that should be avoided while performing the diagnosis:
- A fault in the DEF injector
- A malfunctioning exhaust gas
temperature (EGT) sensor
- Exhaust leakage in the system
- Clogged diesel particulate filter