Error Code P244E: What It Means & What To Do?

<<See All OBD Codes

Love travelling? But hate these halts in the journey? Can't figure out the reason? Well, it could be due to the error code P244E. Here’s how you can solve the error code P244E. It is notable that while the conversion of the remaining exhaust particles into nontoxic gases is being performed, the diesel exhaust fluid is used. The temperature of the exhaust stream should be increased in order to burn off the gases completely. The temperature of the diesel particulate filter is brought to the required level by injecting DEF fluid into the exhaust stream. Only then the system is able to alter the toxic NOx to nitrogen, carbon dioxide and water. Moreover, to reduce the NOx present in the exhaust stream, reductant catalyst is added. One should be careful with the temperature of the filter as when it gets too high, the DPF fails to perform the regeneration process. The code P244E is stored too.

Further, it should be noted that circumstances necessary for the diesel particulate filter regeneration are regulated by the powertrain control module. Also, the test can fail when if the level of the diesel particulate filter regeneration is observed to be less than 10% of the target reduction even after 13 minutes of active regeneration.

What causes this problem with the Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 2 ?

• A fault in the parts associated to the fuel system and the turbocharger system
• Exhaust leakages present in the system
• A defective oxidation catalytic converter (OC)
• Concerns related to aftermarket exhaust accessories or performance mutations

1. Powertrain Control Module - Numerous unexplained symptoms are likely to accompany along an unsound PCM. The unit enables the system and transmission to work in tandem. So a faulty PCM can affect not only a few parts but the functioning of the entire system. Tune into Parts Avatar for top notch sets of PCM.
2. Diesel Exhaust Fluid Pump - A broken diesel exhaust fluid pump can also cause troubles with equipment, including engine de-rating or shut-down. So to prevent any such problems, change or repair your diesel exhaust fluid pump right away. Don’t you worry, Parts Avatar has it all. Tune in now!
3. Diesel Exhaust Fluid Injector- Malfunctioning DEF injector? You are likely to face problems with the engine performance and poor fuel efficiency too. So we advise you to get your DEF injectors changed or repaired as soon as possible. Log into Parts Avatar for your new DEF injector.
4. Exhaust Gas Temperature Sensor - A distorted exhaust gas temperature sensor can end up being the chief host inviting the error code P244E. In addition to the code, it also leads to problems with the overall functioning of the engine. So replacing one can be one of the wisest decisions to avoid a problematic system.
5. Diesel Particulate Filter - A blocked and contaminated diesel particulate filter leads to problem with the functioning of the cooling fans, a slight increase in the fuel consumption and the engine performance. Log into Parts Avatar for your new diesel particulate filter available at just the right prices.
6. Fuel System Parts - Want to fight all these problems associated to the error code P244E? Well, technical problems with the fuel system parts is hazardous for the overall functionality of the system. Mend or restore all the parts now!
7. Turbocharger System Parts - Lack of boost? Poor acceleration? Well, all this happens due to a fault in the turbocharger system parts. Visit us today to get your hands on some of our amazing deals.

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P244E code by listing out some major symptoms. They are mentioned below as follows

Common Symptoms

• Deteriorating engine performance
• Mostly, the engine light illuminated (or service engine soon warning light)

Learn the ways with which you can correct this trouble code P244E:

• Ensure that all the malfunctioning components in the fuel system or the turbocharger system are repaired or restored as per the requirements
• Mend or restore all the exhaust leakages in the system
• A faulty oxidation catalytic converter (OC) should be mended or changed
• It is recommended for you to thoroughly investigate the aftermarket exhaust accessories or performance modifications. If you find any issues, make sure they are repaired or restored

However, if you face any issue then we have stocked a wide range of best priced PCM, exhaust temperature, diesel exhaust fluid, diesel exhaust fluid injector, exhaust gas temperature sensor, exhaust leak, diesel particulate filter, fuel system, turbocharger system and more to help you out in fixing your car.

Want to diagnose the error code P244E? Well, then you should follow these steps in order to diagnose this fault code:

To begin an accurate diagnosis, make use of a standardized OBD-II trouble code scanner. The scanner should be utilized to check and confirm the code and view the freeze frame data by a qualified mechanic. The mechanic should also check for additional trouble codes stored. After the repairs have been performed, the codes should be cleared and the vehicle should be test driven to see if the code reappears. If the code disappears it could likely be due to a faulty diagnose or may signify an intermittent issue.

Common Mistakes When Diagnosing The P244E Code

Diagnosing an error code can always be a strenuous task. So only to save your time and effort we have listed here a few common mistakes that should be avoided while diagnosing the error code P244E

• A malfunctioning DEF injector
• A faulty exhaust gas temperature (EGT) sensor
• Contaminated diesel particulate filter