P2209 OBD Error Code: Problem & Solutions

<<See All OBD Codes

A sudden increase in the fuel consumption and the engine performance along with occasional engine stalling and not starting with improper throttle response may be an indication of problem with the NOx heater sensor circuit, hampering the engine’s performance, thus indicating OBD Code P2209.

Do you want to gain some more knowledge about the P2209 trouble code? This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the NOx Sensor Heater Sense Circuit Range/Performance Bank 1?

• Faulty or damaged NOx heater sensor
• Leakage in the Air Intake System
• Faulty BPS (Barometric Pressure Sensor)
• Open, shorted, frayed, or poor connection of the electrical wirings to the sensor and circuit.
• PCM being faulty and taking wrong readings
• Injection system problems
• Oxygen sensor faulty
• Clogged/broken intake/inlet pipe

1. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
2. Engine Wiring Harness - Your car ECM would not operate properly if there are some cracks or break in the engine wiring harness. Corrosion as well as physical damage are the most common reasons why you should replace an engine wiring harness. Purchase high grade engine wiring harness online from Parts Avatar Canada.
3. Oxygen Sensor - The O2 sensor is mounted in the exhaust manifold to monitor how much unburned oxygen is in the exhaust as the exhaust exits the engine. Monitoring oxygen levels in the exhaust is a way of gauging the fuel mixture. Thus, replace faulty O2 sensor now!
4. Automatic Transmission Module - Faulty transmission module can cause problematic down shifts and upshifts, leading to stalling while accelerating or slowing down. This can also hamper many transmission system parts. Thus, replace it now!
5. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
6. Fuel Injector - The fuel injectors are important component of the fuel delivery system that helps in proper utilization of the fuel entering the engine. This not only helps in taking care of the air to fuel ratios in the engine, helping the combustion process but also enhances the performance. Thus, replace faulty injector now!
7. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
8. Diagnostic Tool - In order to fix these errors, you need few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so and resolve all your vehicle problems. Visit today!
9. Mass Air Flow Sensor - A faulty mass airflow sensor will cause problems similar to low compression or low vacuum, and will also show symptoms similar to when your vehicle has low fuel pressure from a faulty fuel pump. Thus, replace damaged/faulty MAF sensor today!
10. EGR Valve & Parts - Check for bad EGR system and parts that hamper the engine performance and can cause engine stalling and not starting along with rough engine idles. Replace faulty components now!
11. Throttle Body - Throttle body is a really important component that helps the air intake system and controls the air flow in the engine. Check for faulty parts and replace them now!
12. Manifold Absolute Pressure Sensor - Faulty MAP sensor affects the fuel efficiency and the engine performance and the intake systems as well. Replace faulty MAP sensor now!
13. Barometric Pressure Sensor - Damaged/faulty BPS will transmit wrong information to the PCM or nothing at all, affecting the air intake and the fuel delivery system and thus the engine performance. Replace faulty BPS now!
14. Throttle Position Sensor - If the TPS is damaged or faulty, it may cause loss of engine power and acceleration along with reduced fuel economy. Replace faulty sensor now!

After knowing all the cause behind the issues, let’s have a look at few common symptoms of this problem. Read through this section to learn more about this error code.

Common Symptoms

• Malfunction indicator lamp (MIL)/Check Engine Light illumination
• Rough running engine
• Black smoke dispersing from tail pipe
• Hard start or stalling of engine
• Poor throttle response and acceleration
• Decreased fuel economy

Once you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle.

• The malfunctioning ECM should be repaired or replaced as per the need
• It is essential to restore the flawed connector pins of corrosion or loose connections at the sensor circuit
• Repair or replace the quirky NOx heater sensor circuit harness
• Rehabilitate the defaults NOx sensor circuit
• The air pump should be restored to working order

If you need any parts to fix this problem you can easily find them with us. Not only that we also have in stock the best in range auto parts and that too at the most budget friendly prices ever online. Whether you need a Diesel Exhaust Fluid, Diesel Particulate Filter, PCM, ECM, NOx Sensor, Catalytic Converter, Coolant Temperature Sensor, Air Pressure Sensor, Mass Air Flow Sensor, Fuel Injection Parts, Fuel Pressure Regulator, Exhaust Manifold, Flex Hose, Oxygen Sensor you can simply rely on us for quality auto parts.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• He should scan and document the codes in the ECM; and the search for the corresponding freeze frame data for the defect.
• Inspect the air pump wiring connections for issues like loose or corroded connections.
• It is very essential to examine the resistance of the NOx sensor.
• The manufacturer pinpoint tests should be followed for the diagnosis as well as the NOx heater sensor and circuit.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing the P2209 Code

Most of the time we tend to diagnose the problem without completely identifying the real cause of it. It is important to follow all the diagnostic steps and examine each component carefully before correcting. Some of the components to be focused on are listed below;

• Fuel pressure regulator failure
• DEF pump failure
• Fuel injector failure
• Powertrain Control Module (PCM) failure
• Wiring/harness issue