P2105 - OBD Trouble Code
OBD Code P2105 - Throttle Actuator Control System - Forced Engine Shutdown
Usually
with this kind of problem, the direct impact can be seen on the engine
performance. Affected fuel consumption, engine stalling and non-responsive
during acceleration are the first signs along with Malfunction Indicator Light
illumination. OBD Code P2105 directly points out to the problem with the
throttle control system and thus needs immediate treatment.
Learn More About OBD Error Code P2105
The Powertrain Control Module and the Throttle Control System manages the opening and closing of the throttle valve to manage the vehicle’s acceleration. The PCM takes this matter very seriously and keeps in mind the driver’s safety at its priority. At any time if the PCM or the TCS malfunctions, the vehicle’s speed can increase to uncontrollable levels which can be dangerous for the driver. Thus, if the set parameters are not met, the PCM will shut the engine down for safety reasons.
What causes this problem with the Throttle Actuator Control System - Forced Engine Shutdown?
- Engine may overheat
- Coolant Leakages
- Malfunction of EGR Valve
- MAF Sensor Malfunction
- Failure of ABS, Traction Control or Stability Control
- Abnormal system voltages of Automatic Transmission
Replace/Repair These Parts To Fix Code P2105
- Engine Control
Module -
The solenoid might cause a short in the engine control module because of
corrosion in the solenoid or the wire running from the solenoid to the ECM
harness.
- Pedal
Position Sensor - A defective or failing APP
sensor might display a few warning symptoms like triggering of the error codes,
warning lights as well as a few physical symptoms which would alert the driver
that a problem exists. So if you are facing such issues, it is important to get
it inspected and replaced.
- Electronic Control
Unit – The ECU power management
control module keeps in check the hybrid battery charging functions. If the ECU
is faulty, the battery pack will not be able to properly get charged and thus,
the ECU might need replacement.
- Throttle
Position Sensor - Do
you know that the batteries in the sensors are mandated to last five years, so
if your automobile is getting close to 5 years old, then it’s correct time to
replace them! Visit us to buy best quality throttle position sensor online.
- Powertrain Control
Module -
A trouble with the PCM would mean that it is unable to determine the right fuel
mixture and would send the car engine either more or less fuel than it
requires. Now when the engine gets more, the carbon emission would increase and
fuel economy would drop. In case of the opposite, the engine will choke,
stutter, and might start stalling sometimes.
- Diagnostic
Tool – Usually any OBD code problem requires
deep insight into the problem and high grade tools in order to fix it properly.
Thus, buy quality diagnostic tools form us!
Symptoms Of The OBD Error Code P2105
If you are facing OBD error code P2105, then there are significant common symptoms that can be felt or observed. We have worked out a list here to help you out in understanding this problem better.
Common Symptoms
- Illumination in the service engine soon light
- Engine will not begin
- Small or no throttle response
- ABS light might start appearing
- Automatic transmission will not transfer
- Existence of additional codes
How To Correct P2105 Throttle Actuator Control System - Forced Engine Shutdown
It is very important to fix the fault code P2105. So here are some ways with which you can correct this issue:
- Carefully adjust the faults in the wiring or connectors
- Make sure to mend the faulty throttle position sensor
- Repair or replace the quirky MAP sensor
- Rehabilitate the defaults in the throttle body
- The engine control module should be restored to working order
- Recondition the non-functioning manifold absolute pressure (MAP) sensor
- It is necessary to perform proper service of the unsound throttle body motor
However, if you face any issue then we have stocked a wide range of best priced PCM, Throttle Actuator, Throttle Pedal, Throttle Valve, Engine Overheating, EGR Valve Malfunction, ABS, Traction Control, Stability Control, Throttle Actuator Motor, Throttle Body, CAN and more to help you out in fixing your car.
Easy Diagnosis Of Engine Error OBD Code P2105
If you want to easily diagnose this P2105 fault code, then all you have to do is to follow the steps which are mentioned below:
- Make sure that the throttle position sensor is tight and clean. Some people think that it is an obvious step, but if your computer does not get a steady feed throttle position sensor circuit, it can cause multiple issues.
- Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood.
- It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
- These are some of the major wiring problems that you will encounter with error code P2105. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.
Common Mistakes When Diagnosing The P2105 Code
- Accelerator pedal position assembly related issues
- Quirks in the powertrain control module
- There might be a failure in the throttle control motor
- Issues related with the car wiring