Feedback

Error Code P20E9: What It Means & What To Do?

OBD Code P20E9 - Reductant Pressure Too High

<<See All OBD Codes

The trouble code P20E9 can be explained as Reductant Pressure Too High. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. The reductant pressure as the system primes for injection is being monitored by the engine control module. This trouble code would be set by the ECM when the reductant pressure would not be as per the specifications set by the manufacturer.

Learn More About OBD Error Code P20E9

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Reductant Pressure Too High?

  • Quirks in the reductant pump
  • Faulty reductant injector
  • Some issues related to the reductant purge valve
  • Malfunctioning reductant pressure line
  • Defective reductant pressure sensor

Replace/Repair These Parts To Fix Code P20E9

  1. Engine Control Module - Dead cells in batteries can cause a failure in the engine control module. Many times a battery is left in the rig long after a cell has died. This would affect the grounding in the car battery.
  2. Powertrain Control Module - If there are some faults in the PCM, then it may throw off the timing and fuel settings of the engine, which can negatively affect the performance. A flawed PCM may cause the vehicle to experience a reduction in fuel efficiency, power as well as acceleration.
  3. Exhaust Gas Recirculation Valve – Bad EGR valve can cause many performance issues. Common signs include engine performance issues like decreased power and acceleration, rough idle, and the Check Engine Light coming on. Thus, replace faulty EGR valve now!
  4. Diesel Exhaust Fluid Pump – If the DEF pump will not function properly, it can cause increased emissions in the exhaust system and reduced the longevity of the filtration elements in the exhaust system. Thus, replace faulty pump immediately.
  5. Electronic Control Unit - Do you know that the poor performance or unexplained drops in fuel economy or efficiency are often associated to onboard car computer problems, or defective ECU issues?
  6. Diagnostic Tools – Use factory grade diagnostic tools to resolve OBD code P20E9 error. Buy new diagnostic tools and equipment for us.

Symptoms Of The OBD Error Code P20E9

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P20E9 here:

Common Symptoms

  • Appearance of the service engine soon light

How To Correct Reductant Pressure Too High Issue

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

  • Carefully adjust the faults in the reductant injector
  • The reductant pressure sensor should be restored to working order
  • Recondition the non-functioning reductant purge valve
  • It is necessary to perform proper service of the unsound reductant pressure line
  • Adjust the flawed reductant pump

Parts Avatar Canada endeavour’s to fulfil all the needs of its consumer, that’s why we have a huge collection of top quality reductant pressure sensor, camshaft position sensor, ecm, pcm, diesel exhaust fluid, exhaust system parts, diesel particulate filter, oxygen sensor, evap system parts, radiator fan, automatic transmission module, air fuel ratio sensor and many more at equitable prices. We won’t let you down in any way.

Easy Diagnosis Of Engine Error OBD Code P20E9

Here are some steps which you should follow in order to diagnose this fault code:

  • As an initial step the mechanic will carefully inspect the vehicle with the help of a scanner.
  • After this, the technician will connect a scanner to the diagnostic code so that he can recover all the codes and freeze frame data.
  • Note down this information as it can clearly help for further diagnosis.
  • After careful inspection, he will reset the code and test drive your vehicle to check for reappearance of the codes.
  • He will know that an intermittent condition persist, if the code does not return instantly.
  • But if the error code returns quickly, the vehicle is test driven, and then he has to inspect the transmission fluid.
  • If any of the reductant pressure as the system primes for injection is damaged, the mechanic will replace them quickly.
  • Most often, whenever the mechanic carries out any repair work, he will reset the code and test drive your car, to check if the codes return immediately. This can preferably help the mechanic to know what caused this error code in the vehicle.

Common Mistakes When Diagnosing The P20E9 Code

  • Non performance of the powertrain control module
  • Failure in the reductant pressure sensor
  • Issues related to the wiring

Other Diagnostic Codes Related To OBD Code P20E9

P20E8 - Reductant Pressure Too Low