P207C - OBD Trouble Code
OBD CODE P207C - Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low Bank 2
Is your car engine stalling and not starting? Is
there an increase in the fuel consumption? Have you lost the response from the
engine with sudden downfall in acceleration? All these can be an indication
towards OBD error code P207C.
Learn More About OBD Error Code P207C
A P207C trouble code is related to a vehicle’s intake manifold tuning valve (IMTV) position sensor and the signal it sends to the engine computer. When that signal is disrupted due to any reason, a P207C trouble code is triggered.
What causes this problem with the Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low Bank 2?
- Faulty intake manifold tuning valve
- Bad intake manifold tuning valve position sensor
- Faulty wing and poor electrical connections
- Intake manifold tuning valve (IMTV) faulty
- Faulty intake manifold runner control (IMRC) faulty
Replace/Repair These Parts To Fix Code P207C
- Engine Control
Module - The solenoid might cause a short in the
engine control module because of corrosion in the solenoid or the wire
running from the solenoid to the ECM harness.
- Electronic
Control Unit - The ECU power management control
module keeps in check the hybrid battery charging functions. If the ECU is
faulty, the battery pack will not be able to properly get charged and
thus, the ECU might need replacement.
- Powertrain
Control Module - A trouble with the PCM would mean
that it is unable to determine the right fuel mixture and would send the
car engine either more or less fuel than it requires. Now when the engine
gets more, the carbon emission would increase and fuel economy would drop.
In case of the opposite, the engine will choke, stutter, and might start
stalling sometimes.
- Diagnostic
Tool - Usually any OBD code problem requires deep
insight into the problem and high-grade tools in order to fix it properly.
Thus, buy quality diagnostic tools form us!
- Intake
Manifold Actuator - Actuator for an intake manifold
tuning valve is used to regulate airflow in an intake manifold of an
internal combustion engine. The actuator includes a motor, control
circuit, and sensor all mounted in a housing that has an opening through
which an output shaft extends. Thus, replace the faulty actuator
immediately.
- Intake Valve
- An Intake Valve is a spring action valve that is placed on a
cylinder head of an internal combustion engine just next to the spark plug
and exhaust valve. Its main purpose is to allow the proper amount of
air-fuel mixture to enter inside the cylinder when the complete movement
cycle of piston from TDC (top dead center) to BDC (Bottom Dead Center) and
back to TDC takes place. Thus, replace damaged valve today!
- Intake
Manifold - When the intake manifold fails, it can
leave the engine without the increased performance, and in some cases even
reduce performance. Usually a faulty intake manifold will produce a few symptoms
that can alert the driver of a potential issue. Thus, replace damaged
component now!
Symptoms Of The OBD Error Code P207C
Interested in knowing the symptoms to obd code P207C? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low Bank 2.
Common Symptoms
- Check engine light on
- Poor acceleration
- Diminished fuel economy
How To Correct Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low Bank 2
Have
a look at some ways with which you can correct the P207C code:
- Replacing
the intake manifold tuning valve and sensor
- Replacing
damaged wiring and electrical connections
- Cleaning the intake manifold tuning valve
There
is no need to get strained if your OBD Code is still flashing up as we are here
at your service. Have a look at our superior variety of Faulty Intake Manifold
Tuning Valve Position Sensor, Intake Manifold Tuning Valve Position Switch,
Intake Manifold Tuning Valve, Intake Manifold Runner Control, Powertrain
Control Module and many more. Now all your problems would vanish within no
time.
Easy Diagnosis Of Engine Error OBD Code P207C
Following are the steps to diagnose OBD Code P207C error:
- The way your mechanic deals with a P207C will depend on how the code is impacting the driveability of the vehicle. If there are no adverse conditions, it might just be a matter of cleaning grounds, wiring and the intake manifold valve itself, clearing the code, and resetting the engine computer.
- However, if the code is causing poor driving conditions, the valve may be faulty. Your mechanic will start by testing the signal sent from the valve to confirm it’s not within the manufacturer’s parameters. If confirmed, the valve will be replaced by a quality part.
- Also, the valve position sensor might be faulty and might need replacement along with damaged wiring and connections.
- Check for PCM faults that might be corrected by reprogramming and repairing.
Common Mistakes When Diagnosing The P207C Code
While it’s rare for the IMTV to not be the cause of a P207C, it isn’t impossible. It’s important to pay attention to any other trouble codes that accompany the P207C as they could be the root cause of the issue. Testing the valve to confirm will also help isolate the problem instead of replacing something that was never bad to begin with.