P0C56 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0C56 can be explained as Drive Motor “B” Position Sensor Circuit “A” Range/Performance. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. The drive motor “B” position sensor circuit is being monitored by the motor control module. This trouble code would be set by the motor control module when the drive motor “B” position sensor circuit would not be as per the specifications set by the manufacturer

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0C56 error code? This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Drive Motor “B” Position Sensor Circuit “A” Range/Performance?

• Quirks in the hybrid vehicle motor
• Hybrid vehicle motor harness might be unlocked
• Hybrid vehicle motor circuit bad electrical connection
• HV control ECU might not be functioning properly

1. Engine Control Module - ECM faults are rare but can be a big problem as faulty ECM will cause wrong vehicle operations and can also result in wrong OBD codes getting stored in the system which can also cause misdiagnoses. Thus, replace faulty ECM components now!
2. Motor Assembly - There are three general symptoms of a failing motor assembly. Worn, faulty, or broken motor mounts might give rise to clunking, banging, and other impact type sounds as a result of the weight of the engine shifting around. So make sure to replace it with a new one. You can always rely on us as we have best auto parts for our customers.
3. Electronic Control Unit - The ECU coordinates with the temperature sensor to control the blower fan for keeping the battery temperatures under control. So, replace faulty ECU components now!
4. Generator Assembly - The generator assembly unit is responsible for proper functioning for the hybrid motor. Thus, if any component if faulty or damage the vehicle can stall and might not even start. It can also experience poor acceleration and transmissions and loss of power. Thus, it is important to replace faulty components.
5. Powertrain Control Module - Check for PCM error which might be due to circuit faults that might require complete replacement and reprogramming. Replace it now!
6. Diagnostic Tool - In order to detect the error, one needs high grade diagnostic tools. Visit us today to grab amazing deals.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0C56 here:

Common Symptoms

• Appearance of the service engine soon light

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Rehabilitate the defaults in the hybrid vehicle motor
• Carefully adjust the faults in the hybrid vehicle motor circuit
• Make sure to mend the faulty drive motor position sensor
• It is essential to restore the flawed PCM/ECM
• Repair or replace the quirky hybrid vehicle motor harness

Parts Avatar Canada endeavour’s to fulfil all the needs of its consumer, that’s why we have a huge collection of top quality hybrid vehicle motor, body control module component, hybrid vehicle motor harness, oil pressure sensor, engine control unit (ECU), drive motor position sensor and many more at equitable prices. We won’t let you down in any way.

Here are some steps which you should follow in order to diagnose this fault code:

• As an initial step the mechanic will carefully inspect the vehicle with the help of a scanner.
• After this, the technician will connect a scanner to the diagnostic code so that he can recover all the codes and freeze frame data.

• Note down this information as it can clearly help for further diagnosis.
• After careful inspection, he will reset the code and test drive your vehicle to check for reappearance of the codes.
• He will know that an intermittent condition persist, if the code does not return instantly.
• But if the error code returns quickly, the vehicle is test driven, and then he has to inspect the transmission fluid.
• If any of the component is damaged, the mechanic will replace them quickly.
• Most often, whenever the mechanic carries out any repair work, he will reset the code and test drive your car, to check if the codes return immediately. This can preferably help the mechanic to know what caused this error code in the vehicle.

Common Mistakes When Diagnosing The P0C56 Code

• Non performance of the drive motor generator assembly