Error Code P0C1E: What It Means & What To Do?

<<See All OBD Codes

Are there any symptoms to identify the P0C1E error code? What is the diagnostic process? Are these questions popping in your mind? Here’s the solution. ECM, also known as the engine control module will observe the auxiliary transmission fluid pump control module. The OBD II error code – P0C1E will be set in the vehicle by the engine control module if the necessary factory specifications are not met by the auxiliary transmission fluid pump control module

The fluid is pressurized by the auxiliary transmission fluid pump into the transmission system. In order to make sure that the auxiliary transmission fluid pump control module has the ability to perform certain necessary actions, self-check is run by it. And if the self-check fails, then the ECM module will set the P0C1E error code in the vehicle.

What causes this problem with the Auxiliary Transmission Fluid Pump Control Module Internal Temperature Sensor Circuit Low?

• The auxiliary transmission fluid pump control module might be damaged.
• You will see an opening or short circuit in the auxiliary transmission fluid pump control module harness.
• Bad electrical connection in the auxiliary transmission fluid pump control module.

1. Auxiliary Transmission Fluid Pump Control Module - Get the right replacement for your faulty auxiliary transmission fluid pump control module from Parts Avatar at best prices online.
2. Auxiliary Transmission Fluid Pump Control Module Harness - One of the easiest ways to get rid of the P0C1E error in your vehicle is by changing the damaged auxiliary transmission fluid pump control module harness.
3. Engine Control Module - If the fuel injector is shorted, the engine might overload and burn out the injector driver circuit within the engine control module. The engine control module which is shorted must be changed immediately to avoid the P0C1E error code.
4. Engine Wiring Connectors - The engine wiring connectors play an important role in connecting various components. Is the engine wiring connector broken? Get the replacement for faulty engine wiring connectors at affordable prices from PartsAvatar.
5. Automatic Transmission Fluid - The automatic transmission fluid can get contaminated easily and so they must be drained out at regular intervals. P0C1E error can be avoided if the dirty or murky automatic transmission fluid is quickly replaced.
6. Powertrain Control Module - The PCM helps in generating output signals to control relays, actuators, and solenoids. If there is no proper output signal or if it is erratic then the PCM might be faulty. Fix the faulty PCM instantly.

Interested in knowing the symptoms to OBD code P0C1E? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with auxiliary transmission fluid pump control module internal temperature sensor circuit low.

Common Symptoms

• The engine light of the vehicle might keep blinking.
• The vehicle might experience difficulty in moving.

Have a look at some ways with which you can correct the P0C1E code:

• The defective engine control module has to be changed.
• Fixing the damaged engine wiring connectors.
• Changing the muddy automatic transmission fluid.
• The faulty powertrain control module needs replacement.
• The defective auxiliary transmission fluid pump control module has to be changed.
• The broken harness or the faulty circuit of the auxiliary transmission fluid pump control module must be changed.

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of auxiliary transmission fluid pump control module, auxiliary transmission fluid pump control module harness, engine control module, powertrain control module, engine wiring connectors and many more. Now all your problems would vanish within no time.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0C1E code to be stored:

• Initially, the mechanic will use a scanner to check for the stored error code.
• He will now connect a scanner to the diagnostic port of the vehicle and recover the codes and freeze frame data.
• This is usually obtained as it can help him with further diagnostic process.
• Firstly, the mechanic will check the powertrain control module and the engine control module. If there are any faults it will be repaired.
• If there are no errors then the mechanic will check the automatic transmission fluid for any dirt or dust particles.
• The fluid as to be clean without any dirt particles for the proper functioning of the vehicle. If the automatic transmission fluid is muddy, it will be quickly replaced
• As a final step, the mechanic will inspect the engine wiring connectors if it is broken or damaged. If it is broken, the mechanic will carry out the repair process.
• After every component is repaired and when the diagnosis process is properly done, the mechanic has to test drive your vehicle again see if the engine light turns on or if the error code still appears.
• This can help him to locate the area as to where the error occurred

Common Mistakes When Diagnosing the P0C1E Code 

At times the mechanics may wrongly perform some diagnosis, whereas the actual problem may lie with the auxiliary transmission fluid pump control module which might be damaged.