Guide To P0C1C OBD Error Code Solutions

<<See All OBD Codes

What causes this problem with the auxiliary transmission fluid pump control module internal temperature sensor circuit? What does P0C1C error code signify? Is it possible to get rid of this error code? You have landed at the right place for the solution. The engine control module looks after the auxiliary transmission fluid pump control module. The error code will be set by the ECM module if the auxiliary transmission fluid pump control module fails to meet the factory specifications.

The fluid is forced into the transmission by the auxiliary transmission fluid pump. The auxiliary transmission fluid pump control module will run a self-test to make sure that it is capable to perform the needed functions. If the self-check is failed, then the P0C1C error is stored in the vehicle.

What causes this problem with the Auxiliary Transmission Fluid Pump Control Module Internal Temperature Sensor Circuit?

• Defective auxiliary transmission fluid pump control module.
• Auxiliary transmission fluid pump control module harness might have an opening or short circuit.
• Auxiliary transmission fluid pump control module circuit might have a weak electrical connection.

1. Auxiliary Transmission Fluid Pump Control Module - The damaged auxiliary transmission fluid pump control module has to be replaced to avoid the P0C1C error code.
2. Auxiliary Transmission Fluid Pump Control Module Harness - Get the replacement for your faulty auxiliary transmission fluid pump control module harness from Parts Avatar at best prices online.
3. Engine Control Module - If the sensor circuit is shorted it will overload the engine and damage the ECM module. If you find the engine control module to be damaged get the replacement from Parts Avatar.
4. Engine Wiring Connectors - The terminals of the engine wiring connectors must be connected properly. Else it might get damaged easily. Get the engine wiring connectors for your vehicle from Parts Avatar.
5. Automatic Transmission Fluid - The automatic transmission fluid must be replaced for every 30,000 to 60,000 miles. Check the automatic transmission fluid if it is dirty. If you find them dirty, replace them immediately so that the engine can function normally.
6. Powertrain Control Module - The powertrain control module will monitor and compensate for any change in altitude and looks after the overall health of your car. The right replacement for your faulty powertrain control module can be found at Parts Avatar at best prices.

Interested in knowing the symptoms to OBD code P0C1C? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with auxiliary transmission fluid pump control module internal temperature sensor circuit.

Common Symptoms

• The engine light will remain on.
• The vehicle might stay in a stable position.

Have a look at some ways with which you can correct the P0C1C code:

• Replacing the defective engine control module.
• The broken engine wiring connectors need to be fixed.
• The dirty automatic transmission fluid needs to be replaced.
• Changing the damaged powertrain control module.
• Changing the auxiliary transmission fluid pump control module.
• The broken circuit or the harness of the auxiliary transmission fluid pump control module must be changed

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of auxiliary transmission fluid pump control module, auxiliary transmission fluid pump control module harness, engine control module, powertrain control module, engine wiring connectors, body control module and many more. Now all your problems would vanish within no time.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0C1C code to be stored:

• This is a general type of trouble code, where the mechanic will use a scanner to carefully look for any stored error code.
• He will then connect the scanner to the diagnostic port of the vehicle and recover all stored codes and freeze frame data as it can help him with further diagnosis.
• The main error that rises in the vehicle is due to the engine light which might keep blinking all the time or the vehicle might remain idle.
• For this P0C1C error code, initially, the mechanic will carefully inspect the engine control module and as well as the powertrain control module.
• Any possible damages to these two components have to be fixed immediately.
• As a next step, the mechanic will visually examine the automatic transmission fluid if it is clean or dirty.
• Any times there might be any blocks or the dust particles might get settled at the bottom. So it is always best to remove the automatic transmission fluid which is dirty.
• Finally, the mechanic will check for any possible faults in the engine wiring connectors and replace them quickly if there are damaged.
• After every of the diagnostic procedure is carefully done, the mechanic will reset the error code and then test drive the vehicle again.
• This will help him to know if the error code in the vehicle still occurs and also, helps him to locate the area as to where the fault occurred.

Common Mistakes When Diagnosing the P0C1C Code

• Auxiliary transmission fluid pump control module might be faulty.