Guide To P0C07 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0C07 can be explicated as Drive Motor "A" Phase U-V-W Circuit High. The particular code which is triggered depends upon the specific fault which the PCM has detected. If there is some issue with the automobile’s Drive Motor "A" Phase U-V-W Circuit, then the P0C07 fault code would start flashing up.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0C07 trouble code. The error code P0C07 would start triggering when the PCM would detect some fault in drive motor "A" phase U-V-W circuit. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

What causes this problem with the Drive Motor "A" Phase U-V-W Circuit High?

• Some issues related to the hybrid vehicle motor assembly
• Hybrid vehicle motor assembly harness is unlocked
• Unsatisfactory electrical connection in the hybrid vehicle motor assembly circuit

1. Motor Assembly Harness - Defective Motor Assembly Harness can be a major reason why P0C07 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Car Battery - Everything is okay with the ECM and still OBD code P0C07 triggering? Then there must be some defects in Car Battery. Replace them as soon as possible.
3. Motor Assembly - P0C07 code flashing? Get your Motor Assembly inspected from a mechanic.
4. Engine Control Module - If everything is alright with Battery Coolant Pump, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
5. Powertrain Control Module - P0C07 code can display due to some issues in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
6. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0C07 code.
7. Electronic Control Unit - Are there some faults in your Electronic Control Unit? Don’t waste time and get them replaced or else P0C07 code can turn up.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0C07 here:

Common Symptoms

• An engine light flashing (or service engine soon warning light)
• High voltage system not operating correctly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C07:

• The malfunctioning hybrid vehicle motor assembly harness should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid battery
• Rehabilitate the defaults in the motor control module
• The ECM/PCM should be restored to working order
• Adjust the flawed hybrid vehicle motor assembly

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced hybrid powertrain control module, body control module, power inverter and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

First of all you have to make sure that the battery cable connections are tight and clean. Some people think that it is an obvious step, but if your computer does not get a steady feed of electricity from the battery, it can cause multiple issues. Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood. It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire. These are some of the major wiring problems that you will encounter with error code P0C07. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0C07 Code

• Malfunctioning drive motor generator power inverter control module
• There can be a failure in the drive motor generator assembly