P0C04 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0C04 can be explained as Drive Motor "B" Current High. A number of diagnostic tests are performed by the MG ECU to check the right working of the internal system of the ECU. Now in one of those tests, the MG ECU will inspect the outcome of the generator CPU self-test. If a failure is detected in the generator CPU self-test by the MG ECU, then it would mean that there are some internal faults in the generator CPU. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0C04 error code? This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

What causes this problem with the Drive Motor "B" Current High?

• Some flaws in the hybrid vehicle motor assembly
• Hybrid vehicle motor assembly harness is unlocked
• Hybrid vehicle motor assembly circuit might have inadequate electrical connection

1. Motor Assembly - A faulty Motor Assembly can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Hybrid Battery - If everything is alright with PCM, then there is surely some defect in Hybrid Battery. Get it replaced before the situation gets worse.
3. Motor Assembly Harness - P0C04 code can display due to some issues in the Motor Assembly Harness. So it is very important to replace the Motor Assembly Harness with us at equitable prices.
4. Electronic Control Unit - Do you remember when was the last time you got your car Electronic Control Unit checked up? A dirty Electronic Control Unit can cause a lot of issues like displaying P0C04 code.
5. Body Control Module Component - Poor Body Control Module Component can cause a lot of difficulties, so why not get it replaced at time?
6. Engine Control Module - Are there some faults in your Engine Control Module? Don’t waste time and get them replaced or else P0C04 code can turn up.
7. Powertrain Control Module - OBD Code P0C04 can appear because of faulty Powertrain Control Module.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0C04 here:

Common Symptoms

• Illumination in the service engine soon light
• Operation of the high voltage system might not be possible

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must fix the defective engine control module
• It is essential to restore the flawed motor control module
• Rehabilitate the defaults in the hybrid battery
• Carefully adjust the faults in the hybrid vehicle motor assembly
• Recondition the non-functioning hybrid vehicle motor assembly harness

Parts Avatar Canada endeavour’s to fulfil all the needs of its consumer, that’s why we have a huge collection of top quality hybrid powertrain control module, body control module, power inverter and many more at equitable prices. We won’t let you down in any way.