P0C02 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0C02 can be described as Drive Motor "B" Current. A number of diagnostic tests are performed by the MG ECU to check the right working of the internal system of the ECU. Now in one of those tests, the MG ECU will inspect the outcome of the generator CPU self-test. If a failure is detected in the generator CPU self-test by the MG ECU, then it would mean that there are some internal faults in the generator CPU. Then the power management control ECU would trigger up the malfunction indicator lamp and this fault code would be stored in.

Don’t worry if P0C02 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Drive Motor "B" Current?

• There can be inoperative hybrid vehicle motor assembly
• There can be opened or shorted hybrid vehicle motor assembly harness
• Hybrid vehicle motor assembly circuit inferior electrical connection

1. Motor Assembly - There can be some issues with the Motor Assembly due to which you may see P0C02 code appearing over and over again. Visit us to buy best quality Motor Assembly online.
2. Electronic Control Unit - A lot of issues can arise do to defective Electronic Control Unit. Did you just see P0C02 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
3. Body Control Module Component - Faulty Body Control Module Component can be the reason why P0C02 code is flashing. Visit us to purchase top notch Body Control Module Component online.
4. Motor Assembly Harness - It is an important auto part which needs full care. A faulty Motor Assembly Harness can be a reason behind the flashing up of P0C02 code.
5. Battery Smart Unit - OBD Code P0C02 can appear because of faulty Battery Smart Unit.
6. Hybrid Battery - There can be some issues with the Hybrid Battery due to which you may see P0C02 code appearing over and over again. Visit us to buy best quality Hybrid Battery online.
7. Engine Control Module - Are you facing some faults in your Engine Control Module? Don’t worry and get them replaced or else P0C02 code can turn up.
8. Powertrain Control Module - Common cause behind this P0C02 error code can be some fault in Powertrain Control Module. So it will be a good decision to replace them now.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0C02 code by mentioning some major symptoms below:

Common Symptoms

• Appearance of the service engine soon light
• Non operational high voltage system

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C02:

• Recondition the non-functioning hybrid vehicle motor assembly harness
• It is necessary to perform proper service of the unsound hybrid vehicle motor assembly
• Rehabilitate the defaults in the PCM
• Carefully adjust the faults in the motor control module

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of hybrid powertrain control module, body control module, power inverter and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the hybrid battery and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further helping the cause.
• The P0C02 error is triggered if there is a physical problem with the battery which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0C02 Code

• Drive motor generator power inverter control module might start failing
• Some issues related to the drive motor generator assembly