Error Code P0BBB: What It Means & What To Do?

<<See All OBD Codes

Is your car engine not starting again? Do you notice increased fuel consumption over recent period of time? And is your car engine performance degrading? If all this is true, then there might be a problem with Hybrid Battery voltage indicating the OBD Code P0BBB error.

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle to another.

The Powertrain Control Module (ECM) monitors the Hybrid Battery Voltage Sense 'Z' Circuit High and PCM sets the error when the circuit signal is out of specifications. The high voltage battery is composed of many individual battery cells which are monitored to make sure they are all contributing equally to the high voltage system. When any specific cell is not able to produce enough voltage, OBD code P0BBB gets stored and flashed in the system.

What causes this problem with the Hybrid Battery Voltage Sense "Z" Circuit High?

• Broken Hybrid Battery Pack
• The Battery Current Sensor might not be functioning properly
• Defective wiring and connectors in relation to the batteries
• Quirky Powertrain Control Module

1. Battery Temperature Sensor - Faulty temperature sensor will not be able to interpret the battery temperatures which can cause overheating and leakages inside the battery that can cause harm to various components and can be dangerous to driver’s safety also. Thus, replace it at first instance.
2. Battery Coolant Pump - Battery coolant pump plays a vital role in keeping the battery pack cool while operating and keeping it from overheating. Thus, check and replace faulty pump as it can be the reason for temperature sensor indicating out of bound readings.
3. Powertrain Control Module - P0BBB code can display due to some issues in the Powertrain Control Module. Faulty PCM can lead to engine stalling and vehicle going into fail safe mode. Thus, the PCM might need to be repaired, replaced or reprogrammed, if required.
4. Hybrid Battery - If the battery if at fault, it can also be the reason for battery overheating, which can lead to temperature sensor going out of specification. Buy new hybrid battery now!
5. Car Battery & Cables - Most of the time the battery cables and connectors are at fault for a particular component not functioning properly. Thus, the battery cable and connector should be checked for and replace in time.
6. Diagnostic Tool - Usually any OBD code problem requires deep insight into the problem and high-grade tools in order to fix it properly. Thus, buy quality diagnostic tools form us!

Next important thing you need to know about are the common symptoms for this OBD error code P0BBB with your fuel volume control.

Common Symptoms

• Engine stalling and not starting
• Reduced acceleration
• Affected fuel consumption
• Car lighting not working and dimming
• PCM failures
• Check Engine Light Indication

Once you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle.

• Affected hybrid battery cut off switch harness replacement
• Battery current sensor repair or replacement
• Repair or replace the quirky car battery
• Mending the wiring and connection to the hybrid battery connectors

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Electric Vehicle Battery Pack, Electric Vehicle Battery Interface Control Module, High voltage battery assembly and a lot more. We are sure that now all your issues would be resolved.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• After verifying the P0BBB code with an OBD-II scanner, the mechanic should begin with a visual inspection of all electrical components, especially looking for leaking fluid that could have caused shorts or corrosion.
• Any issues should be repaired, and the code should be cleared from the system. If the code reappears after a retest, the mechanic should then move on to performing voltage tests and resistance tests on the sensor, and comparing the information to the manufacturer’s specifications.
• If the readings are within the correct limits, then the sensor needs to be replaced. However, if the readings are not within the correct limits, then the issue lies elsewhere.
• The mechanic should continue checking each possible cause, clearing the code and retesting the system after each attempt, to be sure that the correct solution is found.

Common mistakes when diagnosing the P0BBB code

Most of the time we tend to diagnose the problem without completely identifying the real cause of it. It is important to follow all the diagnostic steps and examine each component carefully before correcting. Some of the components to be focused on are listed below;

• Damaged battery current sensor
• Cam sensor circuit failure
• Hybrid battery failure
• Powertrain Control Module (PCM) failure
• Hybrid battery wiring/harness and connector issue