P0BB8 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0BB8 can be described as Hybrid Battery Voltage Sense “Z” Circuit. Several mini-batteries linked together constitute the high voltage battery pack. Whenever the high voltage control module registers a malfunction with one or more battery packs that make up the high voltage battery assembly, the high voltage control module displays the code P0BB8.

Well, it can be noted that the battery energy control module controls the voltage of the 96 battery cell groups by employing the four hybrid/EV battery interface control modules. Also, linked to every cell group are the voltage sense circuits. All these sense circuits conclude at a connector situated on the top surface area of the battery section. An auxiliary battery wiring harness (serviced individually) links this connector to a hybrid/EV battery interface control module that can be found on the top surface of the battery section. The hybrid/EV battery interface control module plays the role of decoding the voltage reading and then transmitting it to the battery energy control module through the battery control harness. A single hybrid/EV battery interface control module is situated on the battery section one and two, while two of the are located on the battery section three. The scheme of the components that can be serviced well individually include the hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module. The presence of the fault condition in the system is notified by the battery energy control module. Both the diagnostics and the system status are conveyed from the battery energy control module to hybrid/EV powertrain control module 2 via serial data. All the diagnostic trouble code information is mainly stored and controlled by the hybrid/EV powertrain control module 2.

What causes this problem with the Hybrid Battery Voltage Sense “Z” Circuit?

• There can be distorted hybrid/electric vehicle battery pack
• Faulty hybrid/electric vehicle battery interface control module

1. Battery Temperature Sensor - Faulty temperature sensor will not be able to interpret the battery temperatures which can cause overheating and leakages inside the battery that can cause harm to various components and can be dangerous to driver’s safety also. Thus, replace it at first instance.
2. Battery Coolant Pump - Battery coolant pump plays a vital role in keeping the battery pack cool while operating and keeping it from overheating. Thus, check and replace faulty pump as it can be the reason for temperature sensor indicating out of bound readings.
3. Engine Control Module - It is not always the components, but the ECM that can also be faulty. It can cause misinterpretation of correct data thus leading to wrong operational decisions which will affect the transmission and overall engine performance. Thus, replace faulty module and reprogram it now!
4. Powertrain Control Module - Powertrain Control Module can also be faulty in rare cases and thus needs through checks for system and software errors. Thus, check and replace it, if required.
5. Hybrid Battery - If the battery is at fault, it can also be the reason for battery overheating, which can lead to temperature sensor going out of specification. Buy new hybrid battery now!
6. Car Battery & Cables - Most of the time the battery cables and connectors are at fault for a particular component not functioning properly. Thus, the battery cable and connector should be checked for and replace in time.
7. Diagnostic Tools - It is always advisable to use the correct tools and equipment while resolving any OBD code issue as even small mistakes can lead to wrong diagnosis. Thus, always take help from a professional who has the knowledge and experience to such tools in an efficient manner. Buy new quality diagnostic tools from us today!

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0BB8. They are mentioned here as follows:

Common Symptoms

• Check engine light can start flashing up
• Rise in fuel consumption

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0BB8:

• Repair or replace the quirky hybrid/electric vehicle battery interface control module
• Rehabilitate the defaults in the hybrid/electric vehicle battery pack
• The malfunctioning ECU should be repaired or replaced as per the need

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide the best quality of battery control module, hybrid battery, pcm, ecm, ecu, pcm module and ecm module at marketable prices.

Do you wish to diagnose P0BB8 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the Hybrid Battery Voltage Sense “Z” Circuit itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and hybrid battery.
• If the hybrid battery or other related parts are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0BB8 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0BB8 Code

• The high voltage battery connection might be faulty
• Non observance of the high voltage battery assembly
• Some issues with the wiring