P0B92 - OBD Trouble Code

<<See All OBD Codes

This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

The PCM continuously monitors the signals out of the battery current sensor and stores a specific error if the voltage signals if out of its specifications. Thus, if the Hybrid Battery Voltage Sense “R” Circuit Low is unstable, the PCM will store OBD code P0B92 in the system.

What causes this problem with the Hybrid Battery Voltage Sense "R" Circuit Low?

• Faulty Hybrid Battery “B” Voltage
• Malfunctioning wiring and connectors to the battery
• There can be inoperative car battery
• PCM/ECM might be flawed

1. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Car Battery - If everything is alright with PCM, then there is surely some defect in Car Battery. Get it replaced before the situation gets worse.
3. Hybrid Battery - P0B92 code can display due to some issues in the Hybrid Battery. So it is very important to replace the Hybrid Battery with us at equitable prices.
4. Battery Current Sensor - Do you remember when was the last time you got your car Battery Current Sensor checked up? A dirty Battery Current Sensor can cause a lot of issues like displaying P0B92 code.
5. Battery Coolant Pump - There can be some issues with the Battery Coolant Pump due to which you may see P0B92 code appearing over and over again. Visit us to buy best quality Battery Coolant Pump online.
6. Electronic Control Unit – Check for the faults in the ECU if all other components are working properly. Buy new ECU now and replace the faulty one immediately.
7. Diagnostic Tool - In order to be that DIY guy, you need few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, so why not have a look?
8. Starter Motor – Faulty starter motor will lead to engine misfires and stalling. Replace the old starter motor now!
9. Car Battery & Cables – Check for damaged and affected car battery and cables and replace as needed to resolve this OBD code error.
10. Exhaust Manifold – Check for increased exhaust emission and leakages and replace faulty exhaust manifold, if needed. Buy new exhaust components now!

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B92 here:

Common Symptoms

• Check Engine Light On
• Electrical components not working properly
• Improper acceleration
• Braking issues
• Increased fuel consumption

We have listed out so ways which would help you to correct the occurrence of OBD Code P0B92. They are mentioned here as follows:

• Hybrid battery replacement
• Hybrid battery cut off switch circuit repair
• Hybrid battery cut off switch replacement
• Hybrid battery cut off switch harness restoration
• Recondition the non-functioning car battery
• Battery current sensor replacement

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Battery, Diesel Particulate Filter, Exhaust System, Exhaust Manifold, Mass Air Flow Sensor, Intake Manifold Actuator, Mass Air Flow Sensor Cleaner, Air Flow Meter, and many more. Now all your problems would vanish within no time.

If you want to easily diagnose this P0B92 fault code, then all you have to do is to follow the steps which are mentioned below:

• Use of an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the hybrid battery and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further helping the cause.
• The P0B92 error is triggered if there is a physical problem with the battery which could cause the engine performance to go off.

Common Mistakes When Diagnosing the P0B92 Code

Though the hybrid battery itself is generally the cause of P0B92, using the proper tools and following the complete diagnostic procedure without skipping any steps is required as to avoid unneeded repairs. Monitoring the sensor data from the scan tool live data stream is the only way to check for proper operation, and the sensor should not be replaced until it is tested. P0B92 has easily managed symptoms but like any other code, it should be repaired at the earliest convenience. In rare cases where the vehicle runs poorly and the fuel economy goes down, caution is advised when driving to avoid any issues.