P0B8E - OBD Trouble Code

<<See All OBD Codes

The trouble code P0B8E can be explicated as Hybrid Battery Voltage Sense "Q" Circuit High. The voltage of the 96 battery cell groups is monitored by the battery energy control module through the four hybrid/EV battery interface control modules. The voltage sense circuits are joined with every specific cell group, and then the sense circuits would terminate at a connector which is situated on the top surface of the battery section.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0B8E trouble code. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Hybrid Battery Voltage Sense "Q" Circuit High?

• The hybrid/electric vehicle battery pack might be damaged
• Malfunctioning hybrid/electric vehicle battery interface control module

1. Car Exhaust System Parts - There can be some issues with the Car Exhaust System Parts due to which you may see P0B8E code appearing over and over again. Visit us to buy best quality Car Exhaust System Parts online.
2. Powertrain Control Module - Are you facing some faults in your Powertrain Control Module? Don’t worry and get them replaced or else P0B8E code can turn up.
3. Engine Control Module - Common cause behind this P0B8E error code can be some fault in Engine Control Module. So it will be a good decision to replace them now.
4. Hybrid Battery - Engine Control Module is perfectly fine but still but having that trouble code P0B8E flashing? In such a situation your Hybrid Battery might be faulty. Why don’t you think of getting that replaced?
5. Exhaust Manifold - The P0B8E code can also arise due to some issues in Exhaust Manifold. So it is advised to replace them as soon as possible.
6. Car Battery - P0B8E code does not really end up spoiling your Exhaust Manifold, but it might also accompany few Car Battery issues. We have best Car Battery with us.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B8E here:

Common Symptoms

• Check engine light might come into signal
• Rising fuel consumption

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B8E:

• You must fix the defective hybrid battery
• Make sure to mend the faulty hybrid/electric vehicle battery pack
• It is essential to restore the flawed engine control module
• Repair or replace the quirky hybrid/electric vehicle battery interface control module
• The car exhaust system parts should be restored to working order

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced car muffler, performance exhaust systems, custom exhaust and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• As an initial step the mechanic will carefully inspect the vehicle with the help of a scanner.
• After this, the technician will connect a scanner to the diagnostic code so that he can recover all the codes and freeze frame data.
• Note down this information as it can clearly help for further diagnosis.
• After careful inspection, he will reset the code and test drive your vehicle to check for reappearance of the codes.
• He will know that an intermittent condition persist, if the code does not return instantly.
• But if the error code returns quickly, the vehicle is test driven, and then he has to inspect the car hybrid battery.
• If any of the component is damaged, the mechanic will replace them quickly.
• Most often, whenever the mechanic carries out any repair work, he will reset the code and test drive your car, to check if the codes return immediately. This can preferably help the mechanic to know what caused this error code in the vehicle.

Common Mistakes When Diagnosing The P0B8E Code

• High voltage battery connection related issues
• Quirks in the high voltage battery assembly
• Issues related with the car wiring