P0B8C OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0B8C can be described as Hybrid Battery Voltage Sense “Q” Circuit Range/Performance. It is the battery energy control module will regulate presence of the defective condition. The battery energy control module communicates the diagnostics and system status to the hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic error code information. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

Don’t worry if P0B8C error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

What causes this problem with the Hybrid Battery Voltage Sense “Q” Circuit Range/Performance?

• Unusable hybrid/electric vehicle battery pack
• Quirks in the hybrid/electric vehicle battery interface control module

1. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B8C code.
2. Engine Control Module - Poor Engine Control Module can cause a lot of difficulties, so why not get it replaced at time?
3. Car Exhaust System Parts - Are there some faults in your Car Exhaust System Parts? Don’t waste time and get them replaced or else P0B8C code can turn up.
4. Car Battery - OBD Code P0B8C can appear because of faulty Car Battery. Purchase high grade Car Battery online.
5. Exhaust Manifold - Everything is fine with Car Battery and still P0B8C code triggering? Then you must get your Exhaust Manifold checked.
6. Powertrain Control Module - There can be some issues with the Powertrain Control Module due to which you may see P0B8C code appearing over and over again. Visit us to buy best quality PCM online.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0B8C code by mentioning some major symptoms below:

Common Symptoms

• The service engine soon light can start lighting up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B8C:

• Rehabilitate the defaults in the hybrid/electric vehicle battery pack
• The malfunctioning hybrid/electric vehicle battery interface control module should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid battery
• The ECM/PCM should be restored to working order
• Adjust the flawed electronic control unit

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of car muffler, performance exhaust systems, custom exhaust and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• But, if the error code returns, then the mechanic has to check the hybrid battery carefully.
• Also, the mechanic can check for any sign of damages and quickly fix the issue.
• Then the mechanic has to check the car battery, hybrid battery and other electrical components and quickly replace them if he finds them to be damaged or defective.
• If the issues are not yet sorted out, then the mechanic will use a digital voltmeter/ ohmmeter and connect it to the vehicle.
• Once the hybrid battery is inspected, he will thoroughly check all the related parts and repair them accordingly.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing The P0B8C Code

• Non performance of the high voltage battery assembly
• Failure in the car wiring
• The high voltage battery connection might not function properly