P0B3A OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0B3A can be explained as Motor Electronics Coolant Pump "B" Control Circuit High. The motor electronics coolant pump "B" is being monitored by the engine control module. This error code would be set by the ECM when the motor electronics coolant

pump "B" would not be as per the parameters set by the manufacturer.

Do you want to know more about the P0B3A fault code? Don’t worry! Parts Avatar Canada is here at your service. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

What causes this problem with the Motor Electronics Coolant Pump "B" Control Circuit High?

• There can be inoperative motor electronics coolant pump 'B'
• There can be opened or shorted motor electronics coolant pump 'B' harness
• Motor electronics coolant pump 'B' circuit inferior electrical connection

1. Battery Coolant Pump - P0B3A code flashing? Get your Battery Coolant Pump inspected from a mechanic.
2. Engine Control Module - If everything is alright with Battery Coolant Pump, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
3. Powertrain Control Module - P0B3A code can display due to some issues in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
4. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B3A code.
5. Electronic Control Unit - Are there some faults in your Electronic Control Unit? Don’t waste time and get them replaced or else P0B3A code can turn up.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0B3A? Your wish is our demand. Have a look at them below:

Common Symptoms

• Appearance of the service engine soon light
• Car engine might start overheating

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must fix the defective car battery
• Make sure to mend the faulty motor electronics coolant pump 'B' switch
• It is essential to restore the flawed motor electronics coolant pump 'B' circuit
• Rehabilitate the defaults in the motor electronics coolant pump 'B'
• Carefully adjust the faults in the engine control module

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of motor electronics coolant pump, ecm module, pcm module and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0B3A code to be stored:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0B3A code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0B3A Code

• There can be a failure in the high voltage coolant pump
• Defaults in the powertrain control module
• Some issues related to the wiring