P0B00 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0B00 can be defined as Auxiliary Transmission Fluid Pump Motor Phase U Current. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

It is always good to learn more! That is the reason why we are here to help you out in gaining more knowledge about the P0B00 error code. The auxiliary transmission fluid pump motor is being monitored by the engine control module. This trouble code would be set by the ECM when the auxiliary transmission fluid pump motor signal would not be as per the specifications set by the manufacturer. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the Auxiliary Transmission Fluid Pump Motor Phase U Current?

• There can be inoperative auxiliary transmission fluid pump
• There can be opened or shorted auxiliary transmission fluid pump harness
• Auxiliary transmission fluid pump circuit inferior electrical connection

1. Automatic Transmission Fluid - Did your mechanic just found out that there is some fault in the Automatic Transmission Fluid? Buy top notch Automatic Transmission Fluid from us at economical prices.
2. Engine Control Module - A broken Engine Control Module can cause a lot of issues. It would be nice if you get it replaced on time.
3. Powertrain Control Module - Everything is fine with the Automatic Transmission Fluid and still OBD code P0B00 flashing? Then there is definitely some fault with the Powertrain Control Module. Get it checked and replace if needed.
4. Transmission Fluid Pump - Transmission Fluid Pump is an important car part which should never be neglected. May be there is some fault in it due to which P0B00 code may start flashing.
5. Exhaust System Parts - Faulty Exhaust System Parts can be troublesome. You can always rely on us as we have best auto parts for our customers.
6. Muffler - If everything is alright with PCM, then there is surely some defect in Muffler. Get it replaced before the situation gets worse.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0B00 code by mentioning some major symptoms below:

Common Symptoms:

• The service engine soon light can start lighting up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B00:

The valves of each cylinder are kept closed using a pair of arms that replace the conventional engine's roller-type rocker arm. P0B00 code one of these arms follows the cam profile while the second arm connects to the valves. During normal engine operation the two arms are joined by a locking pin.

• Make sure to mend the faulty auxiliary transmission fluid pump
• It is essential to restore the flawed powertrain control module
• Repair or replace the quirky auxiliary transmission fluid pump circuit
• Rehabilitate the defaults in the auxiliary transmission fluid pump harness

However, if you face any issue then we have stocked a wide range of best priced custom exhaust, slp exhaust and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• The error code P0B00 would give rise to the smoke or steam which might start getting emitted from underneath of the car hood. There can be sometimes when the ignition timing has not been set in the right manner and there would be a need to adjust it properly.
• If you are looking under the hood of the car and you find out that there are loose drive belts, then make sure to get them tightened up or replacing them completely would also be a great idea. If there is a pool of fluid underneath the vehicle, then it would indicate that there is a failure in the cylinder head gasket.
• This would give rise to the smoke being blown from the auto exhaust system. This error code can also be caused due to grubby MAF sensor which might cause the car to overcompensate in its fuel-trim adjustments. Due to this, the oxygen sensors might report fuel mixture issues.

Common Mistakes When Diagnosing The P0B00 Code

• Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one don’t follow all the steps carefully. In this code usually people replace auxiliary transmission fluid pump motor without even properly diagnosing it.
• The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.