Guide To P0AFE OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0AFE can be explicated as Hybrid Battery System Voltage Too Low for Voltage Step Up Conversion. Generally, the hybrid battery pack will use multiple sensors so that it can monitor the temperature of each battery cell. If an unlikely temperature is reported by at least one of the battery temperature sensors, then the P0ACA error code will be set in the vehicle. The failure in multiple sensors will disable the high voltage system.

It is the engine control module which would examine the hybrid battery system voltage. This trouble code would be set by the ECM when the hybrid battery system voltage would not be as per the parameters set by the manufacturer.

What causes this problem with the Hybrid Battery System Voltage Too Low for Voltage Step Up Conversion?

• Imperfect hybrid battery pack
• Issue of unbolted hybrid battery pack harness
• Unacceptable electrical connection in the hybrid battery pack circuit

1. Hybrid Drive Cooling Pump - Check for faults in the hybrid battery cooling pump and replace it, if required. If the cooling pump does not function properly, then the battery might not work to its full capacity and can cause serious performance issues.
2. Battery Temperature Sensor - Inspect for faulty battery temperature sensor as it may cause the battery to overheat and not work properly and cause serious physical damages to various starting and charging system components. Thus, replace faulty sensor now!
3. Hybrid Battery - The battery itself can be faulty and can be overheating, which can lead to faster discharge and slower charging, with risks of leakages and other damages to the vehicle. Thus, immediate replacement is advisable.
4. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
5. Car Battery - Faulty car battery can have the problem of overheating and fast discharging. Thus, it can affect the motor performance as well as damaged major components. Replace it immediately.
6. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
7. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
8. Inverter Cooler Pump - The inverter cooler pump can also be faulty and not respond to the PCM instructions. This means that even though the temperature sensor and the PCM are working properly, the cooler pump may not work and cause damage to the battery functions. Thus, replace it immediately.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0AFE here:

Common Symptoms

• Illumination in the service engine soon light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0AFE:

• Repair or replace the quirky hybrid battery pack circuit
• The malfunctioning hybrid battery pack should be repaired or replaced as per the need
• The hybrid battery pack harness should be restored to working order
• Recondition the non-functioning PCM/ECM 

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced battery cable, hybrid battery, hybrid battery fuse, hybrid battery contactor, pcm, ecm, pcm module, ecm module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• Make sure that the hybrid battery system parts are tight and clean. Some people think that it is an obvious step, but if your computer does not get a steady feed hybrid battery system parts, it can cause multiple issues.
• Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood.
• It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
• These are some of the major wiring problems that you will encounter with error code P0AFE. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0AFE Code

• High voltage battery assembly related issues
• Quirks in the powertrain control module (PCM)
• Issues related with the car wiring