P0A99 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0A99 can be defined as Hybrid Battery Pack Cooling Fan 2 Control Circuit Low. If the ECM would detect an unusual voltage within the hybrid battery pack cooling fan 2 control circuits, then the P0A99 error code would start appearing. This would illuminate the check engine light or the transmission warning lamp.

We learn more by looking for the answer to a question. That’s the reason why we are here to provide you the answers for all your questions. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Hybrid Battery Pack Cooling Fan 2 Control Circuit Low?

• Some defects in the hybrid battery pack cooling fan 2
• Opened or shorted hybrid battery pack cooling fan 2 harness
• There can be inferior electrical connection in the hybrid battery pack cooling fan 2 circuit
• Quirks in the battery control module
• Choked battery airflow passageway

1. Hybrid Battery Cooling Fan Harness - The P0A99 code can also arise due to some issues in Hybrid Battery Cooling Fan Harness. So it is advised to replace them as soon as possible.
2. Engine Control Module - Do you remember when was the last time you got your car engine control module checked up? A damaged engine control module can cause a lot of issues like displaying P0A99 code.
3. Hybrid Battery Pack Cooling Fan - Hybrid Battery Pack Cooling Fan is an important car part which should never be neglected. May be there is some fault in it due to which P0A99 code may start flashing.
4. Powertrain Control Module - Is your Powertrain Control Module damaged or broken? Don’t worry as we have solutions for all your problems.
5. Cooling Fan Control - Defective car Cooling Fan Control can be a major reason why P0A99 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
6. Electronic Control Unit - Everything is okay with the PCM and still OBD code P0A99 triggering? Then there must be some defects in Electronic Control Unit. Replace them as soon as possible.
7. Battery Coolant Pump - P0A99 code flashing? Get your Battery Coolant Pump inspected from a mechanic.
8. Hybrid Battery Cooling Fan Connectors - Hybrid Battery Cooling Fan Connectors is an important auto part. Take care of it and you can rely on us to purchase best quality Hybrid Battery Cooling Fan Connectors online.

Willing to know some common symptoms of OBD Trouble Code P0A99? Your wish is our demand. Have a look at them below:

Common Symptoms

• High voltage systems may not function properly
• The service engine soon light can start lighting up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A99:

• Repair or replace the quirky battery coolant pump
• Rehabilitate the defaults in the hybrid battery cooling fan harness
• Carefully adjust the faults in the hybrid battery pack cooling fan 2 harness
• Recondition the non-functioning hybrid battery pack cooling fan 2 circuit
• It is necessary to perform proper service of the unsound engine control module
• Adjust the flawed hybrid battery pack cooling fan 2

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade bcm, battery control module, electric radiator fan, electric cooling fan, electric fan relay kit and a lot more for our precious customers.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P0A99 code does not return soon, he will know that an erratic condition exits.
• But if the error returns instantaneously, he will check every components of the control module as well as the circuit like connectors, wires, harness, fuses etc for any possible fault.
• If any component is damaged, he will fix them right away.
• After performing this repair, he will inspect the transmission fluid as well as its level.
• If the level is below the manufacturer’s specification, it has to be refilled and if the fluid is murky or contaminated it needs to be replaced.
• Every time a repair work is carried out, make sure that the mechanic test drives the vehicle after every repair so that the diagnosis is successful. This can eventually help him to know as to where the error occurred.

Common Mistakes When Diagnosing The P0A99 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one don’t follow all the steps carefully. In this code usually people replace hybrid battery pack cooling fan 2 without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.