P0A97 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0A97 can be elucidated as Hybrid Battery Pack Cooling Fan 2 Performance/Stuck Off. If the engine control module would detect a variation in the voltage coming from the hybrid battery pack cooling fan 2 control circuit that is outside the parameters set by the automobile manufacturer, then it would store the P0A97 error code. This would also give rise to the illumination of the check engine light.

Want to learn something more about the P0A97 fault code? This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

What causes this problem with the Hybrid Battery Pack Cooling Fan 2 Performance/Stuck Off?

• Imperfect hybrid battery pack cooling fan 2
• Hybrid battery pack cooling fan 2 harness might be open or little
• Substandard electrical connection in the hybrid battery pack cooling fan 2 circuit
• There can be distorted battery control module
• Plugged battery airflow passageway

1. Powertrain Control Module - Defective car Powertrain Control Module can be a major reason why P0A97 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Hybrid Battery Pack Cooling Fan - Everything is okay with the ECM and still OBD code P0A97 triggering? Then there must be some defects in Hybrid Battery Pack Cooling Fan. Replace them as soon as possible.
3. Cooling Fan Control - P0A97 code flashing? Get your Cooling Fan Control inspected from a mechanic.
4. Electronic Control Unit - If everything is alright with PCM, then there is surely some defect in Electronic Control Unit. Get it replaced before the situation gets worse.
5. Engine Control Module - P0A97 code can display due to some issues in the Engine Control Module. So it is very important to replace the Engine Control Module with us at equitable prices.
6. Hybrid Battery Cooling Fan Harness - Do you remember when was the last time you got your car Hybrid Battery Cooling Fan Harness checked up? A dirty Hybrid Battery Cooling Fan Harness can cause a lot of issues like displaying P0A97 code.
7. Battery Coolant Pump - Poor Battery Coolant Pump can cause a lot of difficulties, so why not get it replaced at time?
8. Hybrid Battery Cooling Fan Connectors - Are there some faults in your Hybrid Battery Cooling Fan Connectors? Don’t waste time and get them replaced or else P0A97 code can turn up.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• High voltage systems might not operate properly
• Check engine light can start flashing up

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• Make sure to mend the faulty hybrid battery pack cooling fan 2 harness
• It is essential to restore the flawed hybrid battery pack cooling fan 2
• Rehabilitate the defaults in the cooling fan control
• The malfunctioning ECM should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid battery pack cooling fan 2 circuit
• Recondition the non-functioning battery control module
• Adjust the flawed battery coolant pump

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of bcm, battery control module, electric radiator fan, electric cooling fan, electric fan relay kit and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• But, if the error code returns, then the mechanic has to check the transmission fluid.
• If the transmission fluid is dirty or if it is below the expected level, it has to be refilled or the dirty fluid has to be replaced.
• Also, the mechanic can check for any sign of leaks, and quickly fix the issue.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.
• If the issues are not yet sorted out, then the mechanic will use a digital voltmeter/ ohmmeter and connect it to the vehicle.
• Once the circuit is inspected, he will thoroughly check all the harness and repair them accordingly.
• In most cases, this error code can arise mostly because of any shorted wires or dirty or contaminated transmission fluid.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing The P0A97 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one don’t follow all the steps carefully. In this code usually people replace hybrid battery pack cooling fan 2 without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.