Guide To P0A88 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0A88 can be elucidated as 14 Volt Power Module Current Sensor Circuit Low. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

Want to learn something more about the P0A88 fault code? If the engine control module would detect a variation in the voltage coming from the 14-volt power module current sensor circuit that is outside the parameters set by the automobile manufacturer, then it would store the P0A88 error code. This would also give rise to the illumination of the check engine light.

What causes this problem with 14 Volt Power Module Current Sensor Circuit Low?

• There can be inoperative 14-volt power module current sensor
• There can be opened or shorted 14-volt power module current sensor harness
• 14-volt power module current sensor circuit inferior electrical connection
• 14V power module software update required
• Less voltage systems will not run
• Malfunctioning battery

1. Hybrid Battery - Defective car Hybrid Battery can be a major reason why P0A88 code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
2. Power Module Current Sensor Harness - Everything is okay with the Hybrid Battery and still OBD code P0A88 triggering? Then there must be some defects in Power Module Current Sensor Harness. Replace them as soon as possible.
3. Car Battery - P0A88 code flashing? Get your Car Battery inspected from a mechanic.
4. Body Control Module Component - If everything is alright with PCM, then there is surely some defect in Body Control Module Component. Get it replaced before the situation gets worse.
5. Engine Control Module - P0A88 code can display due to some issues in the Engine Control Module. So, it is very important to replace the Engine Control Module with us at equitable prices.
6. Electronic Control Unit - Do you remember when was the last time you got your car Electronic Control Unit checked up? A dirty Electronic Control Unit can cause a lot of issues like displaying P0A88 code.
7. Power Module Current Sensor - Poor Power Module Current Sensor can cause a lot of difficulties, so why not get it replaced at time?
8. Powertrain Control Module - Are there some faults in your Powertrain Control Module? Don’t waste time and get them replaced or else P0A88 code can turn up.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Non operation of the less voltage systems
• Check engine light might come into signal

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• You must fix the defective battery
• Repair or replace the quirky hybrid battery
• Rehabilitate the defaults in the 14-volt power module current sensor circuit
• Carefully adjust the faults in the electronic control unit
• Make sure to mend the faulty 14-volt power module current sensor harness
• It is essential to restore the flawed 14-volt power module current sensor
• Recondition the non-functioning 14V power module software
• Adjust the flawed engine control module

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of dc power module, ecu car, pcm car, electronic control module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P0A88 code does not return soon, he will know that an erratic condition exits.

Common Mistakes When Diagnosing The P0A88 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one doesn’t follow all the steps carefully. In this code usually people replace 14 Volt power module current sensor without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.