Guide To P0A84 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0A84 can be explicated as Hybrid Battery Pack Cooling Fan 1 Control Circuit Low. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0A84 trouble code. The cooling air would start flowing into the inlet on the right of the rear seat and would then travel through an intake duct to the battery blower assembly on the right surface of the luggage compartment. The cooling air would travel through an intake duct which would then connect the battery blower assembly to the upper right surface of the HV battery assembly and then it would simply flow to the HV battery assembly. The cooling air would flow from the top to the bottom between the HV battery modules. Now once the modules have been cooled by it, it is then discharged from the bottom right surface of the HV battery assembly.

What causes this problem with Hybrid Battery Pack Cooling Fan 1 Control Circuit Low?

• Imperfect battery cooling blower assembly
• Unbolted battery cooling blower assembly harness
• Unacceptable electrical connection in the battery cooling blower assembly circuit
• The integration relay might not be functioning properly
• Quirks in the battery smart unit
• Malfunctioning power management control ecu

1. Battery Cooling Blower Assembly - OBD Code P0A84 can appear because of faulty Battery Cooling Blower Assembly.
2. Cooling Blower Assembly Harness - There can be some issues with the Cooling Blower Assembly Harness due to which you may see P0A84 code appearing over and over again. Visit us to buy best quality Cooling Blower Assembly Harness online.
3. Electronic Control Unit - Are you facing some faults in your Electronic Control Unit? Don’t worry and get them replaced or else P0A84 code can turn up.
4. Hybrid Battery - Common cause behind this P0A84 error code can be some fault in Hybrid Battery. So, it will be a good decision to replace them now.
5. Integration Relay - Electronic Control Unit is perfectly fine but still but having that trouble code P0A84 flashing? In such a situation your Integration Relay might be faulty. Why don’t you think of getting that replaced?
6. Body Control Module Component - The P0A84 code can also arise due to some issues in Body Control Module Component. So, it is advised to replace them as soon as possible.
7. Engine Control Module - P0A84 code does not really end up spoiling your Body Control Module Component, but it might also accompany few Engine Control Module issues. We have best Engine Control Module with us.
8. Car Battery - Are you facing OBD Error Code P0A84? Don’t worry as you can fix this issue with new Car Battery. We care for our customers, that’s why we have Car Battery for every make and model.
9. Powertrain Control Module - A broken Fuel Pressure Regulator can cause a lot of issues. It would be nice if you get it replaced on time.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A84 here:

Common Symptoms

• Visibility in the check engine light
• High voltage system might not work

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A84:

• It is essential to restore the flawed battery smart unit
• Repair or replace the quirky battery cooling blower assembly circuit
• Rehabilitate the defaults in the PCM/ECM
• The malfunctioning integration relay should be repaired or replaced as per the need
• Carefully adjust the faults in the battery cooling blower assembly
• The power management control ecu should be restored to working order
• Recondition the non-functioning battery cooling blower assembly harness

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced battery blower, battery cooling fan, battery connectors and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• The mechanic will use an OBD scanner, to inspect the error codes in the vehicle.
• By connecting a scanner to the diagnostic port of the vehicle, the mechanic or the technician can easily recover every of the stored codes and freeze frame data.
• Record this information, as it can be helpful for further diagnosis.
• At times, the shift solenoid itself can cause issue if it is damaged or broken.
• Once you carefully inspect every component, you have to reset the code. Once it is reset, test drive your vehicle to see if the codes reappear.
• If the error does not return quickly, then there can be an intermittent connection in the vehicle.

Common Mistakes When Diagnosing The P0A84 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one don’t follow all the steps carefully. In this code usually people replace hybrid battery without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.