Error Code P0A6E: What It Means & What To Do?

<<See All OBD Codes

OBD error code P0A6E is a generic error code that indicates some problem with your vehicle’s drive motors phase “B”. Now, you must be wondering what is this problem and how does that matter when it comes to your vehicle’s performance? Another question that might be haunting you must be how serious is this problem? Well, to get your answers to all these questions you will need to go through the subsequent sections

OBD code P0A6E will be set by your vehicle’s high voltage control module when it detects failing current monitoring sensors. Wondering what causes this “B” phase W current high condition? Go through the causes mentioned below:

What causes this problem with the Drive Motor "B" Phase W Current High?

• Malfunctioning inverter with converter assembly will lead to this issue
• Open or shorted inverter with converter assembly harness
• Bad electrical connection in the inverter with converter assembly circuit

1. HV Battery - Facing OBD Error Code P0A6E? Well, you can get that fixed with a new HV battery. Also, you can find quality HV battery for every make and model with us at PartsAvatar.
2. HV Control Module - High voltage parts are all fine but you still find the trouble code P0A6E flashing? In such a situation your HV Control Module not be working according to your vehicle’s specifications. Why don’t you think of checking our website for our wide range of HVCM?
3. Electronic Control Unit - P0A6E error code is all about using the right ECU, so why not get your car’s engine control unit diagnosed and replace them if they are damaged.
4. Inverter with Converter Assembly - Common causes behind that P0A6E error code can be defective inverter with converter assembly. So, it might be a good decision to replace them now.
5. Inverter - If your car’s inverter battery is found to be binding, you might think of exchanging them. PartsAvatar has a sensible selection for you to choose from.
6. Inverter Current Sensor - P0A6E error code might have to do with faulty inverter current sensor of your vehicle. You can find the inverter current sensor that is best suited to your car right here at PartsAvatar.

Willing to know some common symptoms of OBD Code P0A6E? Your wish is our demand. Have a look at them below:

Common Symptoms

• High voltage system might refuse to work properly
• Flickering of check engine light

We have listed out some ways which would help you to correct the occurrence of OBD Code P0A6E. They are mentioned here as follows:

• First of all, you will need to inspect all the high voltage system parts for any damage
• If you come across any loose connections in the inverter with converter assembly circuit, you will need to fix it.
• Next, you will need to inspect for any short or open wires in the related circuits
• Lastly, make sure to fix or replace the faulty inverter with converter assembly

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of HV Battery, Electronic Control Unit, Inverter with Converter Assembly, Inverter, Inverter Current Sensor and many more. Now all your problems would vanish within no time.

If you wish to conduct an easy diagnosis of the obd error code P0A6E you will need advanced scan tools that are capable of factory sensor readings and codes. You will need these scan tools to determine when and where the problem has occurred or is still occurring. You will need to clear the code and test drive the vehicle while keeping a close check on the scan tool data. Check if the fault returns or not. In order to produce more results, you can conduct a visual inspection of all the related parts mentioned above. You can also make use of the digital voltage scope to monitor the sensor signals for a better diagnosis. Also, for further deeper diagnosis you will need certain diagnostic tools that we have listed out for you below.

• Advanced scan tools.
• Digital Voltage Scope with attachments
• Hand Tools

Common Mistakes When Diagnosing The P0A6E Code

There are chances that you undergo an inverter with converter assembly replacement, but it might not be needed. This way you will end up spending unnecessary bucks on your car. The code could be solved with a simple computer learn procedure or reprogramming. Therefore, a proper diagnosis is always recommended.