Guide To P0A6C OBD Error Code Solutions
OBD Code P0A6C - Drive Motor "B" Phase W Current
Are you experiencing non-operating high voltage system? Is your
vehicle flashing check engine light? If your answer is ‘YES’ to all these
questions, then we have no good news to tell you. Chances are that your engine
is set to P0A6C obd error code.
Now,
what is this alien code - P0A6C? Let’s have a look at the sections below to
understand it better
Learn More About OBD Error Code P0A6C
Wondering what this error code indicates? How is it affecting your
vehicle? P0A6C is a generic OBD-II code that indicates an issue with your
vehicle’s drive motors phase “B”. Your vehicle’s high voltage control module
(HVCM), makes use of the sensors to inspect the high voltage cables for current
flowing through it. In case it detects any failures with the current monitoring
sensors, it will start flashing OBD error code P0A6C.
What causes
this problem with the Drive Motor "B" Phase W Current?
- Inverter with converter assembly being faulty
- Inverter with converter assembly harness being open or shorted
- Loose or poor electrical connections.
Replace/Repair These Parts To Fix OBD Code P0A6C
- HV Battery - Looking
for budget friendly HV Batteries to fix your vehicle? Check out PartsAvatar
Canada to grab your best auto parts deal.
- HV Control Module - P0A6C
code can be set if your HV control models itself are faulty. Why not just get
them changed with a brand new if found damaged?
- Electronic
Control Unit - No need to search for electronic
control modules any longer. Just visit PartsAvatar Canada today and get your
parts shipped within the least possible time.
- Inverter With
Converter Assembly - Considering this problem is
related to your vehicle’s inverter with converter assembly, it might be a good
idea to replace the defective ones with the new ones now.
- Inverter - We have
in stock inverters for all make and models and that too at the best prices ever
online. Why not have a look?
- Inverter Current
Sensor - You can find with us best in range
inverter current sensor. So, no need to think twice just make a final purchase
now.
Symptoms Of OBD Error Code P0A6C
It
is essential to know the symptoms of an issue as only then you would be able to
solve the problem. So that’s why we have listed out some major symptoms of OBD
Code P0A6C here:
Common Symptoms
- Non-operating
high voltage system
- Flickering
check engine light
How To Correct P0A6C Drive Motor "B" Phase W Current
Here
are some ways with the help of which you will be able to correct the OBD Code
P0A6C:
Inspect
all the high voltage system parts for any damage
- Fix
any loose connections in the inverter with converter assembly circuit
- After
that inspect for any short or open wires in the related circuits
- Now,
make sure to fix or replace the faulty inverter with converter assembly
There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade HV Battery, Electronic Control Unit, Inverter With Converter Assembly, Inverter, Inverter Current Sensor and a lot more for our precious customers.
Easy Diagnosis Of Engine Error OBD Code P0A6C
If
you wish to conduct an easy diagnosis of the obd error code P0A6C you will need
advanced scan tools that are capable of factory sensor readings and codes. You
will need these scan tools to determine when and where the problem has occurred
or is still occurring. You will need to clear the code and test drive the
vehicle while keeping a close check on the scan tool data. Check if the fault
returns or not.
In
order to produce more results, you can conduct a visual inspection of all the
related parts mentioned above. You can also make use of the digital voltage
scope to monitor the sensor signals for a better diagnosis. Also, for further
deeper diagnosis you will need certain diagnostic tools that we have listed out
for you below.
- Advanced
scan tools.
- Digital
Voltage Scope with attachments
- Hand
Tools
Common Mistakes When Diagnosing The P0A6C Code
There
are chances that you undergo an inverter with converter assembly replacement,
but it might not be needed. This way you will end up spending unnecessary bucks
on your car. The code could be solved with a simple computer learn procedure or
reprogramming. Therefore, a proper diagnosis is always recommended.