P0A54 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0A54 can be described as Drive Motor "A" Current Sensor Circuit High. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

Error code P0A54 flashing? Steer to our amazing website for a wide range of automobile parts and accessories. We won’t let you down in any way as for us our customers are everything. Visit us as fast as you can. It is the engine control module which would examine the drive motor "A" current sensor circuit. This trouble code would be set by the ECM when the drive motor "A" current sensor circuit would not be as per the parameters set by the manufacturer.

What causes this problem with the Drive Motor "A" Current Sensor Circuit High?

• There can be inoperative drive motor A current sensor
• There can be opened or shorted drive motor A current sensor harness
• Drive motor A current sensor circuit inferior electrical connection

1. Dash Check Engine Light - Did your mechanic just found out that there is some fault in the Dash Check Engine Light? Buy top notch Dash Check Engine Light from us at economical prices.
2. Drive Motor Current Sensor Harness - A broken Drive Motor Current Sensor Harness can cause a lot of issues. It would be nice if you get it replaced on time.
3. Drive Motor Current Sensor - Everything is fine with the engine control module and still OBD code P0A54 flashing? Then there is definitely some fault with the Drive Motor Current Sensor. Get it checked and replace if needed.
4. Powertrain Control Module - Powertrain Control Module is an important car part which should never be neglected. May be there is some fault in it due to which P0A54 code may start flashing.
5. Engine Control Module - A faulty Engine Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0A54. They are mentioned here as follows:

Common Symptoms

• The service engine soon light can start lighting up
• Non-operational high voltage system

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A54:

• You must fix the defective drive motor A current sensor
• It is essential to restore the flawed drive motor A current sensor harness
• Rehabilitate the defaults in the PCM/ECM
• Carefully adjust the faults in the drive motor A current sensor circuit
• The dash check engine light should be restored to working order

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide best quality of drive motor current sensor, drive motor current sensor harness, motor current sensor, ecm car, ecm module at marketable prices.

Do you wish to diagnose P0A54 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P0A54 code does not return soon, he will know that an erratic condition exits.
• But if the error returns instantaneously, he will check every components of the control module as well as the circuit like connectors, wires, harness, fuses etc for any possible fault.
• If any component is damaged, he will fix them right away.
• After performing this repair, he will inspect the transmission fluid as well as its level.
• If the level is below the manufacturer’s specification, it has to be refilled and if the fluid is murky or contaminated it needs to be replaced.
• Every time a repair work is carried out, make sure that the mechanic test drives the vehicle after every repair so that the diagnosis is successful. This can eventually help him to know as to where the error occurred.

Common Mistakes When Diagnosing The P0A54 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one doesn’t follow all the steps carefully. In this code usually people replace drive motor A current sensor without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.