P0A52 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0A52 can be described as Drive Motor "A" Current Sensor Circuit Range/Performance. If the engine control module would detect a variation in the voltage coming from the drive motor "A" current sensor circuit range/performance that is outside the parameters set by the automobile manufacturer, then it would store the P0A52 error code. This would also give rise to the illumination of the check engine light.

Don’t worry if P0A52 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among audi, citroen, chevrolet, ford, hyundai, nissan, peugeot, and volkswagen vehicles.

What causes this problem with the Drive Motor "A" Current Sensor Circuit Range/Performance?

• Some flaws in the drive motor A current sensor
• Drive motor A current sensor harness might be opened or sometimes shorted
• Drive motor A current sensor circuit might have inadequate electrical connection

1. Powertrain Control Module - Do you remember when was the last time you got your car Powertrain Control Module checked up? A dirty Powertrain Control Module can cause a lot of issues like displaying P0A52 code.
2. Dash Check Engine Light - Are there some faults in your Dash Check Engine Light? Don’t waste time and get them replaced or else P0A52 code can turn up.
3. Drive Motor Current Sensor Harness - OBD Code P0A52 can appear because of faulty Drive Motor Current Sensor Harness.
4. Engine Control Module - Everything is fine with Engine Control Module and still P0A52 code triggering? Then you must get your Engine Control Module checked.
5. Drive Motor Current Sensor - There can be some issues with the Drive Motor Current Sensor due to which you may see P0A52 code appearing over and over again. Visit us to buy best quality Drive Motor Current Sensor online.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0A52 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light
• Issue of non-operational high voltage system

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A52:

• If you find out that there are some faults in the drive motor A current sensor, then it should be adjusted very carefully
• The drive motor A current sensor harness should be restored to working order
• Recondition the non-functioning drive motor A current sensor circuit
• It is necessary to perform proper service of the unsound engine control module as per the need

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of drive motor current sensor, drive motor current sensor harness, motor current sensor, ecm car, ecm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0A52 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0A52 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one doesn’t follow all the steps carefully. In this code usually people replace drive motor A current sensor without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.