P0A4E OBD Error Code: Problem & Solutions

<<See All OBD Codes

Stressed? Don’t know how to start? Well, all you need is this little Parts Avatar guide that is definitely going to help you crack the OBD error code P0A4E. “Generator Position Sensor Circuit High” is generally identified as the OBD-II code high voltage system may not operate. For determining the position of the interior components in the hybrid motor, the hybrid control module uses sensors. The code P0A4E is stored by the engine control module when there is defect identified in the position sensor by the hybrid control module.

It should be noted that in order to ensure an extremely efficient control of the MG1 and MG2, the generator resolver notices the position of the magnetic poles. The formation of the generator resolver and the way it’s connected to the HV control and ECU collates with that of the motor resolver.

What causes this problem with the Generator Position Sensor Circuit High?

• A jammed or an unsound hybrid vehicle transaxle assembly (generator resolver)
• The harness of the hybrid vehicle transaxle assembly disconnected or shorted
• A fragile electrical connection in the hybrid vehicle transaxle assembly circuit
• A malfunctioning inverter with converter assembly

1. Position Sensor - A lot of problems can come up due to malfunctioning position sensor. So, it highly recommended to gets yours changed now in order to put a halt to the complications caused by the code P0A4E.
2. Drive Coil - Burnt or an unsound drive coil can often be troublesome. So, to add some speed to your ride you definitely need the perfect quality drive coils offered at Parts Avatar. Isn’t that just an amazing deal?
3. Metallic Rotor - Facing the error code P0A4E? A poor-quality metallic rotor can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P0A4E. Tune into Parts Avatar for supreme quality metallic rotor at economical prices.
4. Motor Generator - A tainted or a completely unsound motor assembly can end up being the chief host inviting the error code P0A4E. So, replacing one can be one of the wisest decisions to avoid a problematic system.
5. Converter Assembly - Now you can instantly get your error code fixed instantly with a new converter assembly. Parts Avatar right place that provides premium quality across the country.
6. Generator Assembly - Having complications due to a faulty generator assembly? Don’t you worry, Parts Avatar has it all. A malfunctioning generator assembly could end up being the root cause behind the error code P0A4E.
7. Motor Assembly - Don’t know how to mend the error code P0A4E? Well, it could be due to a damaged motor assembly. Fix your error code now with a new one available right at your doorstep.
8. Connector - Short circuited or distorted connectors can be problematic. Solve your error code now by instantly changing your old connectors.

Detecting the right error code stored can often be a tedious task. So, for our customers we have listed here a few common symptoms that should be noted by the driver:

Common Symptoms

• Engine light flashing (or service engine soon warning light)

Here jotted down are some steps with the help of which you will be able to rectify the OBD code P0A4E:

• Amendments should be made in order to fix the malfunctioning hybrid vehicle transaxle assembly (generator resolver)
• It is essential to take measures to replace or repair the inverter with converter assembly
• A visual inspection should be performed. One should make sure of mending the harness of the hybrid vehicle transaxle assembly if open or short circuited
• Fix the weak electrical connection running in the hybrid vehicle transaxle assembly circuit

However, if you face any issue then we have stocked a wide range of best priced pcm, powertrain control module, fuel injectors, fuel injector harness, body control module, fuel injection kit, injection pump, fuel injector tester, fuel injection conversion kit, diesel fuel injectors, fuel injector tester, transmission control module, electronic control module, ecm module, fuel injection pump, ecm module, engine control unit, engine harness, brake control module, throttle body fuel injection, engine wiring harness and more to help you out in fixing your car.

Want to diagnose the error code P0A4E? Well, then you should follow these steps in order to diagnose this fault code:

To begin an accurate diagnosis, make use of a standardized OBD-II trouble code scanner. The scanner should be utilized to check and confirm the code and view the freeze frame data by a qualified mechanic. The mechanic should also check for additional trouble codes stored. After the repairs have been performed, the codes should be cleared and the vehicle should be test driven to see if the code reappears. If the code disappears it could likely be due to a faulty diagnose or may signify an intermittent issue.

Common Mistakes When Diagnosing the P0A4E Code

Only for you we have listed here a few common mistakes that should be avoided while the diagnosis procedure is being performed:

It is advisable that before performing the repairs the mechanic should go through the system carefully, as at times he may end up performing major repairs that are expensive and time taking while the code could have been solved by just repairing some minor faults

• A malfunction in the position sensor