P0A4C - OBD Trouble Code

<<See All OBD Codes

Check engine light” as alarming as it sounds. Not anymore. With Parts Avatar Canada, your one stop destination for hassle free shopping and supreme quality parts, we assure you not only the best at rock bottom prices to keep you on a payroll but also to equip you with a straightforward guide to crack the OBD’S. Here’s all you need to know about the OBD code P0A4C. In order to guarantee an extremely efficient control of MG2 and MG1, a resolver that is actually a sensor is highly essential as it determines the position of the magnetic poles. It is observed that the generator resolver structure and the method of connection of the inverter with the converter assembly share similarities with that of the motor resolver. The output signals from the generator resolver and the errors are all regulated by the inverter with converter assembly.

Generally, sensors are used by the hybrid control module in order to determine the precise position of the hybrid motor’s interior components. The error code P0A4C is stored by the engine control module when the hybrid control module notifies a defect in the position sensor.

What causes this problem with the Generator Position Sensor Circuit Range/Performance?

• A distorted hybrid vehicle transaxle assembly (generator resolver)
• A disconnected or shorted hybrid vehicle transaxle assembly harness
• A bad electrical connection running in the hybrid vehicle transaxle assembly
• A faulty inverter with converter assembly

1. Position Sensor - Tired of these problems caused by the error code P0A4C? Well, it could be due to a damaged position sensor. So, we always recommend to change it.
2. Drive Coil - A corroded or defective can end up being the chief host inviting the error code P0A4C. So, replacing one can be one of the wisest decisions to avoid a problematic system.
3. Metallic Rotor - Facing the trouble code P0A4C? Well, get that fixed with a new metallic rotor at Parts Avatar available online at the best prices.
4. Motor Generator - Weary and jammed motor generator can often be problematic. So, to add some spark to your ride you definitely need the perfect quality motor generator offered at Parts Avatar. Isn’t that just the perfect deal?
5. Converter Assembly - Having problems with the converter assembly? Don’t you worry, Parts Avatar has it all. An erroneous converter assembly could end up being the root cause behind the Error code P0A4C.
6. Generator Assembly - Want to fight the error code P0A4C? Well, get that mended with a new general assembly at Parts Avatar available online at the best prices.
7. Motor Assembly - Hate the complication caused due to the error code P0A4C? Well, we advise you to get your defective motor assembly changed. Tune into Parts Avatar now.
8. Connectors - Having problems with the connectors? Don’t you worry, Parts Avatar has it all. A broken connector could end up being the root cause behind the error code P0A4C.

The symptoms of the error code P0A4C at first may seem quite confusing but with Parts Avatar, we promise to end all your confusions. Here listed are a few general symptoms that are observed as soon as the error code is stored:

Common Symptoms

• One can observe an illuminated engine light (or service engine soon warning light)

Wishing to combat the error code P0A4C? Here listed are a few steps that need to be followed to avoid or overcome the OBD error code P0A4C –

• It is extremely important to mend or repair a malfunctioning hybrid vehicle transaxle assembly (generator resolver)
• A distorted inverter with converter assembly should be changed or repaired as soon as possible in order to fight the error code
• In order to overcome the complications caused by the error code P0A4C, a poor electrical connection running in the hybrid vehicle transaxle assembly should be mended or restored
• All the electrical parts should be visually inspected. All the open or short-circuited hybrid vehicle transaxle assembly harnesses should be replaced or repaired

However, if you face any issue then we have stocked a wide range of best priced pcm, powertrain control module, fuel injectors, fuel injector harness, body control module, fuel injection kit, injection pump, fuel injector tester, fuel injection conversion kit, diesel fuel injectors, fuel injector tester, transmission control module, electronic control module, ecm module, fuel injection pump, ecm module, engine control unit, engine harness, brake control module, throttle body fuel injection, engine wiring harness and more to help you out in fixing your car.

A scanner (or code reader) and a digital volt/ohmmeter will be helpful in successfully diagnosing this code-storing condition. Begin your diagnosis with a visual inspection of system wiring, connectors, and components. Repair or replace any open, shorted, damaged, or corroded items as required and retest the system to make sure that repairs were successful. If the system wiring, connectors, and components appear to be in normal working order, connect the scanner to the diagnostic connector and record all stored trouble codes and freeze frame data. This information can be extremely helpful in diagnosing intermittent conditions that may have contributed to this code being stored. After the codes are cleared, operate the vehicle to see if the code returns. If the code fails to immediately return, you may have an intermittent condition.

Common Mistakes When Diagnosing the P0A4C Code

Only for you we have listed here a few common mistakes that should be avoided while the diagnosis procedure is being performed:

• It should be noted that before performing the repairs the mechanic should go through the system thoroughly, as at times he may end up performing major repairs that are expensive and time taking while the code could have been solved by just repairing some minor faults.
• A malfunction in the position sensor