P0952 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0952 can be explained as Auto Shift Manual Control Circuit Low. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

Do you want to know more about the P0952 fault code? Don’t worry! Parts Avatar Canada is here at your service. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

What causes this problem with the Auto Shift Manual Control Circuit Low?

• There can be inoperative auto shift manual switch
• There can be opened or shorted auto shift manual switch harness
• Auto shift manual switch circuit inferior electrical connection

1. Auto Transmission Shift Solenoid - A faulty Auto Transmission Shift Solenoid can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Powertrain Control Module - If everything is alright with Auto Transmission Shift Solenoid, then there is surely some defect in Powertrain Control Module. Get it replaced before the situation gets worse.
3. Auto Transmission Control Module - P0952 code can display due to some issues in the Auto Transmission Control Module. So, it is very important to replace the Auto Transmission Control Module with us at equitable prices.
4. Electronic Control Unit - Do you remember when was the last time you got your car Electronic Control Unit checked up? A dirty Electronic Control Unit can cause a lot of issues like displaying P0952 code.
5. Engine Control Module - Poor Engine Control Module can cause a lot of difficulties, so why not get it replaced at time?
6. Body Control Module Component - Are there some faults in your Body Control Module Component? Don’t waste time and get them replaced or else P0952 code can turn up.
7. Gear Shift Extension - OBD Code P0952 can appear because of faulty Gear Shift Extension.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0952? Your wish is our demand. Have a look at them below:

Common Symptoms

• Auto stick shifting will be weakened
• Illumination in the service engine soon light

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• The malfunctioning auto shift manual switch circuit should be repaired or replaced as per the need
• Carefully adjust the faults in the auto shift manual switch harness
• The auto transmission shift solenoid should be restored to working order
• Recondition the non-functioning electronic control unit
• It is necessary to perform proper service of the unsound engine control module
• Adjust the flawed auto shift manual switch
• Make sure to correct the issues in the catalytic converter
• There might be some situations where the ignition misfire might be caused, so it should be mended properly
• The defaults in the oxygen sensor should be repaired

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of cvt transmission parts, steering wheel covers, hurst shifter, paddle shift, 700R4 transmission parts, zf transmission parts, 4L60E transmission parts, 4L80E transmission parts, standard transmission parts and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0952 code to be stored:

• A number of loud sounds might come from the turning radiator fan as well as the belt which would turn the blade of the fan.
• There are a lot of belt driven devices present under the hood of the car.
• An engine pulley is ascended to the engine of an automobile and drives all belts.
• A serpentine belt is present in the cars which is a continuous belt used to drive a lot of peripheral devices.
• Make sure that you inspect the working of the VCT solenoid.
• Search for a sticking or stuck VCT solenoid valve caused due to contamination.
• You can always have a look at the vehicle specific repair manual to perform the tests for the VCT unit.

Common Mistakes When Diagnosing The P0952 Code

• Failure in the powertrain control module
• There can be some faults in the auto stick shift switch
• Wiring issue may exist