P0950 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0950 can be described as Auto Shift Manual Control Circuit. The P0950 trouble code would indicate that an auto shift manual control which is not as per the predetermined limit has been detected by the PCM. Now when this would occur, the fault code would be stored and there would be an illumination in the malfunction indicator light.

Don’t worry if P0950 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. The auto shift manual signal from the auto shift manual switch is monitored by the transmission control module. The transmission control module would set the P0950 fault code when the signal from the auto shift manual switch would not be as per the specifications set by manufacturer.

What causes this problem with the Auto Shift Manual Control Circuit?

• Malfunctioning auto shift manual switch 
• Auto shift manual switch harness might be open or little 
• Substandard electrical connection in the auto shift manual switch circuit

1. Auto Transmission Control Module - Do you remember when was the last time you got your car Auto Transmission Control Module checked up? A dirty Auto Transmission Control Module can cause a lot of issues like displaying P0950 code.
2. Electronic Control Unit - Poor Electronic Control Unit can cause a lot of difficulties, so why not get it replaced at time?
3. Gear Shift Extension - Are there some faults in your Gear Shift Extension? Don’t waste time and get them replaced or else P0950 code can turn up.
4. Auto Transmission Shift Solenoid - OBD Code P0950 can appear because of faulty Auto Transmission Shift Solenoid.
5. Powertrain Control Module - Everything is fine with Auto Transmission Shift Solenoid and still P0950 code triggering? Then you must get your Powertrain Control Module checked.
6. Body Control Module Component - There can be some issues with the Body Control Module Component due to which you may see P0950 code appearing over and over again. Visit us to buy best quality Body Control Module Component online.
7. Engine Control Module - A lot of issues can arise do to defective Engine Control Module. Did you just see P0950 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0950 code by mentioning some major symptoms below:

Common Symptoms

• Auto stick shifting will be impaired
• The service engine soon light can start lighting up 

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0950:

• You must mend the issues present in the electrical connection
• It is essential to restore the flawed auto shift manual switch 
• Repair or replace the quirky auto shift manual switch circuit
• Rehabilitate the defaults in the auto shift manual switch harness 

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of cvt transmission parts, steering wheel covers, Hurst shifter, paddle shift, 700R4 transmission parts, zf transmission parts, 4L60E transmission parts, 4L80E transmission parts, standard transmission parts and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

If the P0950 code is appearing, then you might hear noisy sound of explosions from the back of the automobile upon acceleration. First of all, you must inspect the carburetor properly to be sure that there is a balance between the fuel as well as the air. Now if these settings are perfect, then the distributor cap should be properly checked for any cracks or hairline splits as it can result in a backfire. The spark plugs should be moved so that they are tidy and not defective. The engine gaskets should be examined for any sign of fault, as they ensure the right amount of gas exchange within the car engine. This error code refers to the camshaft timing. If there are some faults in the camshaft timing, then there would be an illumination in the check engine light and then this error code would be stored.

Common Mistakes When Diagnosing The P0950 Code

• Non-performance of the auto stick shift switch
• Failure in the powertrain control module
• There can be some issues related to the wiring