Error Code P084A: What It Means & What To Do?

<<See All OBD Codes

The trouble code P084A can be explained as Transmission Fluid Pressure Sensor/Switch "H" Circuit. The transmission fluid pressure sensor/switch is generally situated on the side of the valve body inside the transmission, but there can be sometimes where it may be found screwed into the side of the transmission case/body itself.

Do you want to know more about the P084A fault code? Don’t worry! Parts Avatar Canada is here at your service.

The transmission fluid pressure sensor/switch signal is monitored by the transmission control module. This trouble code would be set by the TCM when the transmission fluid pressure sensor/switch would not be as per the parameters set by the manufacturer.

What causes this problem with the Transmission Fluid Pressure Sensor/Switch "H" Circuit?

• The voltage in the signal circuit to the TFPS sensor might be short
• Ground in the signal circuit to the TFPS sensor might be small
• Malfunctioning TPMS Sensor
• PCM might be flawed
• There might be an open in the signal circuit to the TFPS sensor

1. Auto Transmission Control Module - A faulty Auto Transmission Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Powertrain Control Module - If everything is alright with Auto Transmission Control Module, then there is surely some defect in Powertrain Control Module. Get it replaced before the situation gets worse.
3. Electronic Control Unit - P084A code can display due to some faults in the Electronic Control Unit. So it is very important to replace the Electronic Control Unit with us at equitable prices.
4. Body Control Module Component - Do you remember when was the last time you got your car Body Control Module Component checked up? A dirty Body Control Module Component can cause a lot of issues like displaying P084A code.
5. Auto Transmission Shift Solenoid - Poor Auto Transmission Shift Solenoid can cause a lot of difficulties, so why not get it replaced at time?
6. Engine Control Module - Are there some faults in your Engine Control Module? Don’t waste time and get them replaced or else P084A code can turn up.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P084A? Your wish is our demand. Have a look at them below:

Common Symptoms

• The service engine soon light can start lighting up
• Automobile starts off in 2nd or 3rd gear
• Growth in the fuel consumption
• Illumination in the malfunction indicator light
• Change in shift grade
• Issues related to transmission not shifting properly

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

A synchronizer pin should be released to deactivate the cylinders which would interlock the cam follower and rocker arms. The synchronizer pin is resolved by this error code is then released utilizing the hydraulic pressure which is commanded by a solenoid.

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of ecu tuning, pcm car, ecu programming, ecm car, transmission sensor, ecu tuning software and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P084A code to be stored:

• First of all you should research the technical service bulletins for the specific vehicle by year, model before you start with the troubleshooting process for any malfunction.
• Your issue may be a familiar issue with a well known fix put out by the manufacturer and can help a lot in save your precious time as well as money during the process of diagnosis.
• A great example of this would be if there are any known power related codes set along with the P084A, or if there is more than one pressure sensor/switch code set.
• If this is the situation, then you should start your diagnosis with the power related fault code first, or with the multiple code diagnosis first, as this may be the reason why P084A code is appearing.
• After that the Transmission Fluid Pressure Sensor/Switch should be located on your specific vehicle. The TFPS is generally present attached to the side of the valve body inside the transmission, although sometimes it may be found screwed into the side of the transmission case/body itself.
• Now once you have located it, the connector and wiring should be visually inspected. Carefully search for scraping, rubbing, bare wires, burn spots or melted plastic.
• The connector should be pulled apart and carefully inspect the terminals inside the connector.
• You must check if they look burned or have a green tint which would indicate corrosion, especially if they are attached outside the transmission case.
• An electrical contact cleaner should be utilized and a plastic bristle brush if cleaning of the terminals is required.
• After that you should let it dry and then electrical grease should be applied where the terminals contact. A scan tool should be used, the diagnostic trouble codes from memory should be cleared up, and see if P084A code is returning back. If it does not appear, then it would mean that there were some faults in the connections.

Common Mistakes When Diagnosing The P084A Code

• Transmission fluid level might be low
• Failure in the transmission fluid pressure sensor
• Some issues related to the wiring
• Non performance of the transmission control module