Guide To P0787 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0787 can be elucidated as Shift Timing Solenoid A Low. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

Want to learn something more about the P0787 fault code? One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. The automatic transmission can shift easily as per the driving needs because of the presence of shift timing solenoid. It is the transmission control module which checks well as controls the functionality of the solenoids.

What causes this problem with the Shift Timing Solenoid A Low?

• Malfunctioning ECM
• There can be inoperative automatic transmission fluid
• TCM might be flawed
• Imperfect shift timing solenoid
• There can be distorted Pin/connector
• There can be issue of less ATF
• There can be obstruction in ATF passages

1. Auto Transmission Shift Solenoid - Defective car shift solenoid can be a major reason why P0787 code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
2. Automatic Transmission Valve Body Kit - A lot of issues can arise do to defective Automatic Transmission Valve Body Kit. Did you just see P0787 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
3. Powertrain Control Module - P0787 code flashing? Get your Powertrain Control Module inspected from a mechanic.
4. Automatic Transmission Filter - Everything is okay with the ECM and still OBD code P0787 triggering? Then there must be some defects in Automatic Transmission Filter. Replace them as soon as possible.
5. Engine Wiring Harness - It is an important auto part which needs full care. A faulty Engine Wiring Harness can be a reason behind the flashing up of P0787 code.
6. Body Control Module Component - OBD Code P0787 can appear because of faulty Body Control Module Component.
7. Automatic Transmission Fluid - P0787 error code also relates to problems with the Automatic Transmission Fluid. Find Automatic Transmission Fluid with us.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Stiff or rasping shifting
• Variable shifting
• Defective driveability
• Attached in gears
• Quirky acceleration
• Transmission gliding
• Incapable shift timing
• Declining performance

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• Repair or replace the quirky transmission fluid
• You must fix the defective transmission fluid
• Make sure to mend the faulty shift solenoid circuit wiring
• It is essential to restore the quirks in the engine control module
• Rehabilitate the flawed in the shift solenoids

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of engine light, automatic transmission module, torque converter, battery connectors and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

A good starting point is always a technical service bulletin search for your particular vehicle. Carefully inspect the automatic transmission fluid. You must change your fluid if it is grimy, smells burnt, overfilled and unusual colour. If you've owned your vehicle for 30,000 to 60,000 miles and you do not remember when was the last time you changed your fluid or have any records of it, not only may this be your issue, but you should follow your maintenance schedule to avoid this situation.

Former fluid is mucky fluid, grimy fluid can cause blockages and blockages can be a big reason why this fault code is appearing so you must change your fluid! The manufacturers recommended steps should be followed properly when you are inspecting ATF. This basic step can differ a meaningful amount between the models as well as makes. The fluid is in nice condition, code is still present and symptoms exist? It all depends upon your specific model; the shift solenoid may be accessible externally.

Now if you find out that this is the case, then you should check the solenoid and its harness/connectors to find out the signs of defect. All the issues should be repaired or replaced as per the need. It would be helpful if you will have a peak for any leaks as well! If your shift solenoid is internal, then you should attempt to access it, work around it for now. Exhaust other avenues, internal transmission diagnosing and repairing should be left to a certified technician. The TCM and harness' involved in this circuit may be subject to rasping road conditions so make sure everything is complete in all aspects.

After that the shift timing solenoid should be inspected. You may be able to test the solenoid itself multiple ways. One test may include a resistance test where you use a multimeter to measure the resistance between the pins in the solenoid to verify to a degree its electrical integrity. Then the other would include manually applying voltage to the solenoid to verify its mechanical operation. You should specify either one in your manufacturers service manual/technical literature.

The circuit from the TCM should be tested properly. Then check the functionality of the sensor and its circuit by performing the same tests as above but from the pins at the TCM and/or ECM. This trick would be very helpful in verifying the integrity of the solenoid as well as electrical integrity.

Common Mistakes When Diagnosing The P0787 Code

Common mistake which is made when you are diagnosing the P0787 trouble code is that you do not inspect the shift solenoid circuitry when the shift solenoids are being replaced. The technicians should keep this thing in mind that they must look electrical components before replacing any parts which can give rise to P0787 error code.