Error Code P0785: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0785 can be explicated as Shift Timing Solenoid A Malfunction. The automatic transmission can shift easily as per the driving needs because of the presence of shift timing solenoid. It is the transmission control module which checks well as controls the functionality of the solenoids.

Do you want to gain some more knowledge about the P0785 trouble code? If the P0785 trouble code is appearing, then it would mean that the PCM has found an unusual fault in the shift/time solenoid. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Shift Timing Solenoid A Malfunction?

• Faulty shift timing solenoid
• Malfunctioning automatic transmission fluid
• Less ATF
• There can be inoperative wiring harness
• TCM might be flawed
• Some issues related to the ECM
• Imperfect Pin/connector

1. Auto Transmission Shift Solenoid - There can be some issues with the Auto Transmission Shift Solenoid due to which you may see P0785 code appearing over and over again. Visit us to buy best quality Auto Transmission Shift Solenoid online.
2. Automatic Transmission Valve Body Kit - A lot of issues can arise do to defective Automatic Transmission Valve Body Kit. Did you just see P0785 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
3. Automatic Transmission Filter - Faulty Automatic Transmission Filter can be the reason why P0785 code is flashing. Visit us to purchase top notch Automatic Transmission Filter online.
4. Engine Wiring Harness - It is an important auto part which needs full care. A faulty Engine Wiring Harness can be a reason behind the flashing up of P0785 code.
5. Body Control Module Component - OBD Code P0785 can appear because of faulty Body Control Module Component.
6. Automatic Transmission Fluid - P0785 error code also relates to problems with the Automatic Transmission Fluid. Find Automatic Transmission Fluid with us.
7. Powertrain Control Module - P0785 code flashing? Get your Powertrain Control Module inspected from a mechanic.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0785 here:

Common Symptoms

• Inferior driveability
• Bad acceleration
• Fixed in gears
• Unpredictable shifting
• Ineffective shift timing
• Diminishing performance
• Transmission sliding

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• Carefully adjust the faults in the shift/timing solenoid valve circuit
• Make sure to mend the faulty pump in the transmission
• It is essential to restore the mechanical failures in the transmission
• Rehabilitate the dirty transmission fluid
• Repair or replace the quirky shift solenoid, or shift solenoid pack
• You must clear the internal transmission fluid passages which have been blocked
• The malfunctioning TCM or PCM should be repaired or replaced as per the need

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced engine light, automatic transmission module, torque converter, battery connectors and a lot more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

You must always start with a technical service bulletin search for your particular vehicle. It is essential to inspect the automatic transmission fluid. You must change your fluid if it is grimy, smells burnt, overfilled and unusual colour. If you've owned your vehicle for 30,000 to 60,000 miles and you do not remember when was the last time you changed your fluid or have any records of it, not only may this be your issue, but you should follow your maintenance schedule to avoid this situation. Former fluid is mucky fluid, grimy fluid can cause blockages and blockages can be a big reason why this fault code is appearing so you must change your fluid! The manufacturers recommended steps should be followed properly when you are inspecting ATF. This basic step can differ a meaningful amount between the models as well as makes.

The fluid is in nice condition, code is still present and symptoms exist? It all depends upon your specific model; the shift solenoid may be accessible externally. Now if you find out that this is the case, then you should check the solenoid and its harness/connectors to find out the signs of defect. All the issues should be repaired or replaced as per the need. It would be helpful if you will have a peak for any leaks as well! If your shift solenoid is internal, then you should attempt to access it, work around it for now. Exhaust other avenues, internal transmission diagnosing and repairing should be left to a certified technician. The TCM and harness' involved in this circuit may be subject to rasping road conditions so make sure everything is complete in all aspects.

After that the shift timing solenoid should be inspected. You may be able to test the solenoid itself multiple ways. One test may include a resistance test where you use a multimeter to measure the resistance between the pins in the solenoid to verify to a degree its electrical integrity. Then the other would include manually applying voltage to the solenoid to verify its mechanical operation. You should specify either one in your manufacturers service manual/technical literature.

The circuit from the TCM should be tested properly. Then check the functionality of the sensor and its circuit by performing the same tests as above but from the pins at the TCM and/or ECM. This trick would be very helpful in verifying the integrity of the solenoid as well as electrical integrity.

Common Mistakes When Diagnosing The P0785 Code

• One of the most common mistakes when you are diagnosing the P0785 trouble code is that you do not inspect the shift solenoid circuit when the shift solenoids are being replaced
• The technicians should keep this thing in mind that they must look electrical components before replacing any parts which can give rise to P0785 error code