P0369 - OBD Trouble Code

<<See All OBD Codes

The error code P0369 can be identified as the Camshaft Position Sensor B Circuit Intermittent Bank 1. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

The camshaft position sensor is used in an engine to record the spinning rate of the camshaft. The engine control module uses this information to control ignition and fuel injection. The camshaft position sensor would sense the retraction of camshaft to identify a specific cylinder.

What causes this problem with the Camshaft Position Sensor B Circuit Intermittent Bank 1?

• Camshaft position sensor circuit might have bad electrical connection
• The car battery might be dead or weak
• There can be some defects in the camshaft position sensor
• Defaults in the starter motor
• Flaws in the starting system circuit
• A camshaft position sensor harness might be shorted or opened

1. Crankshaft Position Sensor - Defective car Crankshaft Position Sensor can be a major reason why P0369 code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
2. Fuel Injector - Everything is okay with the Crankshaft Position Sensor and still OBD code P0369 triggering? Then there must be some defects in Fuel Injector. Replace them as soon as possible.
3. Powertrain Control Module - P0369 code flashing? Get your Powertrain Control Module inspected from a mechanic.
4. Cylinder Head Gasket - If everything is alright with PCM, then there is surely some defect in Cylinder Head Gasket. Get it replaced before the situation gets worse.
5. Engine Control Module - P0369 code can display due to some flaws in the Engine Control Module. So, it is very important to replace the Engine Control Module with us at equitable prices.
6. Ignition Coil - Do you remember when was the last time you got your car Ignition Coil checked up? A defective Ignition Coil can cause a lot of issues like displaying P0369 code.
7. Camshaft Position Sensor - Are there some faults in your Camshaft Position Sensor? Don’t waste time and get them replaced or else P0369 code can turn up.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Engine might start stalling
• Flashing up of service engine soon warning light
• There can be lack or loss of power

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• The defected car battery should be tested carefully
• It is very important to repair/replace any disconnected, shorted, damaged, or corroded wires, connectors, or other components
• Test the camshaft for irregular ignition timing
• The vehicle should be taken out for a test drive

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of electric battery, reluctor, starter motor, diesel injection and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

A camshaft position sensor should be used by the car mechanic that will work with a metal reluctor ring on the end of the camshaft. This and other specialty tools (e.g. a digital ohmmeter, scanner, oscilloscope, etc.) will be used to program the PCM with ignition timing reference values that will help to diagnose the problem

It is very important to carry out a visual inspection of the wiring, connectors and other components involved in the camshaft

Common Mistakes When Diagnosing The P0369 Code

• It’s important to keep in mind that the P0369 code is in reference to the camshaft position sensor circuit – every component of it. Otherwise, it’s too easy to simply blame the problem on the sensor and rush to replace it.
• It is very important to inspect the entire system and if the sensor is bad, make sure it’s replaced with a quality OEM part so that you do not have to face a similar situation once again in a short period of time