Error Code P0341: What It Means & What To Do?

<<See All OBD Codes

Is the car’s Check Engine Light illuminated? Is the car engine stalling and sometimes not starting? Is there a loss of power and acceleration with affected fuel economy? Thus, there might be an issue with the camshaft position sensor or circuit indicating OBD code P0341 error in the ECM/PCM.

OBD code P0341 means problem with the Camshaft Position Sensor Circuit Range/Performance

P0341 is an OBD-II generic code that gets stored in the engine control module (ECM) if it detects the engine camshaft position sensor circuit is not within specifications. If the sensor pulses do not correlate to the pulses of the crankshaft sensor, OBD code P0341 will get stored in the system.

What causes this problem with the Camshaft Position Sensor Circuit Range/Performance?

• Camshaft sensor wiring routed too close to spark plug wiring (causing interference)
• Poor wiring connection at camshaft sensor
• Poor wiring connection at PCM
• Bad camshaft sensor
• Damaged reluctor wheel

1. Camshaft Position Sensor - The main indicative of OBD Code P0341 is a faulty exhaust camshaft. Immediate replacement is required. Visit us today to get new camshaft position sensor.
2. Powertrain Control Module - P0341 error code also relates to problems with the powertrain. Find all the Powertrain related parts with us.
3. Ignition Spark Plug - Check for faulty ignition spark plugs and replace as required. Buy now!
4. Timing Belt and Pulleys - Another reason for P0341 error is the faulty engine timing belt and its parts. To remove the error, immediate replacement is in order.
5. Starter Motor - The engine will have problems with starting and will stall with the starter motor doesn’t work properly. Replace faulty motor now!
6. Car Battery & Cables - Check for faulty car battery and cables and replace now!
7. Diagnostic Tool - In order to detect the error, one needs high grade diagnostic tools. Visit us today to grab amazing deals.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0341? Your wish is our demand. Have a look at them below:

Common Symptoms

• The Check Engine Light will be illuminated and the code is set in ECM memory
• The engine could stall or not start when failure is present
• The engine may have a misfire and may buck or jerk while driving for an intermittent connection
• The engine may not start or have low power if it does start

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Replacing the faulty camshaft sensor
• Replacing a broken reluctor ring on the camshaft gear
• Repairing corroded connections to the camshaft sensor

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s

why we offer a good range of Camshaft Position Sensor, Powertrain Control Module, Ignition spark, Battery, Starter Motor.

Here are some steps which you should follow in order to diagnose this fault code:

• A technician begins by hooking the vehicle to an OBD-II scanner to verify that the code is present, and check for other codes.
• The freeze frame data along with current data is recorded, and the codes are then cleared to see if they reoccur.
• Visual inspection of the wiring and connectors to check for loose connections, corrosion, or shorts is done.
• A specialized tool may be used to test the camshaft sensor. Other tests of the crankshaft and camshaft components may help pinpoint the problem, as well as inspection of the timing chain or timing belt.
• Disconnect and check the resistance and signal voltage from the camshaft sensor.
• Check the sensor reluctor wheel for breakage or damage on the camshaft or camshaft gear.
• If all the components check out, inspect for the fault in the PCM as it can sometime store wrong OBD code and thus might need replacement or reprogramming.

Common Mistakes When Diagnosing OBD Code P0341

Most of the time the camshaft is immediately replaced without analysing the problem as per the OBD code error. Thus, proper scan tools need to be used to check for the real cause of the problem that may be ECM, wiring issues, fuel system problems and many more parts other than the camshaft only. Thus, proper evaluation and remedy is advisable.