Feedback

Guide To P0302 OBD Error Code Solutions

OBD Code P0302 - Cylinder 2 Misfire Detected

<<See All OBD Codes

The trouble code P0302 can be described as Cylinder 2 Misfire Detected. This would mean that the misfire detection monitor has detected an engine misfire, in the cylinder 2 of the engine.

Learn More About OBD Error Code P0302

Willing to learn more about this error code?


P0302 is a common fault code which would signify that there is a misfire issue on the engine cylinder 2. The modern vehicles are equipped with a computer with a misfire detection monitor which would tell the scanning tool about misfire and would detect that which cylinder is having an issue. If there is an engine misfire, then it would mean that there is a lack of spark, low compression as well as the fuel quality is poor. When there would be a misfire of the engine, then the check engine light would be triggered on and would show a specific number. The last digit in the number would specify the number of cylinders which is faulty.


What causes this problem with the Cylinder 2 Misfire Detected?


  • Flaws in the Crankshaft sensor
  • Cracks in the distributor cap
  • EGR valves or tubes might be clogged
  • The ignition timing might be off
  • Fuel injectors might be defective
  • Issues in the catalytic converter
  • Leakage in the head gasket
  • Some quirks in the camshaft sensor
  • Faults in the oxygen sensor
  • There can be some defects in the powertrain control module
  • There can be some issues in the mass air flow sensor
  • Defaults in the rotor button
  • The spark plugs in cylinder 2 might be damaged or worn
  • There can be low fuel pressure
  • There can be damaged/ worn spark plug wires or coils
  • Distributor cap might be defected or worn
  • There can be faulty throttle position sensor
  • There can be a leakage in the vacuum
  • Issue of lack of compression in cylinder 2

Replace/Repair These Parts To Fix OBD Code P0302

  1. Fuel Injector - Do you remember when was the last time you got your car Fuel Injector checked up? A damaged Fuel Injector can cause a lot of issues like displaying P0302 code.
  2. Camshaft Sensor - Poor Camshaft Sensor can cause a lot of difficulties, so why not get it replaced at time?
  3. Crankshaft Sensor - Are there some faults in your Crankshaft Sensor? Don’t waste time and get them replaced or else P0302 code can turn up.
  4. Head Gasket - OBD Code P0302 can appear because of faulty Head Gasket. Visit us to solve your car parts related problems.
  5. Oxygen Sensor - Everything is fine with turbocharger/supercharger and still P0302 code triggering? Then you must get your Oxygen Sensor checked.
  6. Powertrain Control Module - There can be some issues with the Powertrain Control Module due to which you may see P0302 code appearing over and over again. Visit us to buy best quality Powertrain Control Module online.
  7. Spark Plug - A lot of issues can arise do to defective Spark Plug. Did you just see P0302 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.

Symptoms Of OBD Error Code P0302

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0302 code by mentioning some major symptoms below:


Common Symptoms


  • The car may die when it is stopped
  • The car might idle roughly
  • The check engine light might start appearing
  • Issue of vehicle hesitation while accelerating
  • There can be lack of power while driving
  • Car might take a lot of time to start up or it might not start up at all
  • Rise in the fuel consumption

How To Correct P0302 Cylinder 2 Misfire Detected

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0302:


  • The damaged crankshaft sensor should be replaced
  • You can always replace the damaged or worn spark plug wires and coils
  • Carefully repair or replace clogged EGR valves or tubes
  • The leakage in the vacuum should be repaired
  • Fix the leaking head gaskets
  • The defected camshaft sensor should be restored
  • Reinstate the faulty spark plugs
  • If there are some flaws in the mass air flow sensor, then it should be replaced properly
  • The faulty oxygen sensor should be replaced or repaired as per the requirement
  • Replace the fuel injectors
  • Defective throttle position sensor should be restored
  • Replacing faulty internal engine components
  • You should diagnose and repair other related trouble codes
  • Replace the distributor cap and rotor button, wires, coils, and plugs0
  • Repair the faulty catalytic converter
  • The damaged engine should be replaced if there is damage in the cylinder
  • Faulty powertrain control module should be replaced as per the need


There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Coolant Temperature Sensor, Air Fuel Ratio Sensor, Oxygen Sensor and many more. Now all your problems would vanish within no time.

Easy Diagnosis Of Engine Error OBD Code P0302

Here are some steps which you should follow in order to diagnose this fault code:

 

  • An OBD-II scanner should be utilized to retrieve freeze frame data as well as all of the trouble codes that have been stored by the powertrain control module
  • Make sure that you test drive of the vehicle to see if the P0302 trouble code comes back
  • The live data should be reviewed to identify which cylinders are showing misfire data
  • Carefully inspect the spark plug wires or coil packs for wiring that is damaged or worn
  • Make sure that you check the spark plugs for excessive wear, cracks or breaks
  • Examine the coil pack wiring at the harness and connector for breaks as well as corrosion
  • Replace the spark plugs, spark plug wires, coil packs, coil pack wiring at harness and connector as per the requirement
  • If the P0302 trouble code is still present after the spark plugs, spark plug wires and coil packs have been replaced, then you must inspect the fuel injectors and fuel injector system for faults
  • Older vehicles have a distributor cap and rotor button system. For these vehicles, the mechanic will inspect the distributor cap and rotor button for damage, cracks or excessive wear
  • If other related trouble codes have been stored by the powertrain control module, the mechanic will need to diagnose and repair these issues as necessary
  • You should test drive the vehicle again to see if the P0302 trouble code is triggering up again or not
  • If the P0302 trouble code returns, the compression system should be inspected. A fault in the compressor is rare but possible for this code
  • If the P0302 trouble code still persists, then the powertrain control module is defective. Then you should replace or reprogram the PCM

 

Common Mistakes When Diagnosing The P0302 Code

 

  • It is very essential to visually inspect the fuel injector wiring for damage before you start replacing the spark plugs, spark plug wires, coil packs, and coil pack wires
  • The chances are rare for faulty fuel injectors to be the problem, which is the reason why you must complete a quick visual inspection which would save a lot of your time. Just make sure that the possibility of a faulty cylinder is ruled out as the cause of the problem
  • Many a times people forget that it is vital to complete a diagnosis and necessary repairs of other related trouble codes, which have been stored by the powertrain control module. The issue of misfiring can be caused because of any of these constituents

Other Diagnostic Codes Related To OBD Code P0302

  P0301 - Cylinder 1 Misfire Detected

P0303 - Cylinder 3 Misfire Detected

P0304 - Cylinder 4 Misfire Detected

P0305 - Cylinder 5 Misfire Detected

P0306 - Cylinder 6 Misfire Detected

P0307 - Cylinder 7 Misfire Detected

P0308 - Cylinder 8 Misfire Detected

P0309 - Cylinder 9 Misfire Detected